|
|
Joined: Jul 2010
Posts: 185
Member
|
OP
Member
Joined: Jul 2010
Posts: 185 |
I have an SX200 EL with a T1 that keeps busing out. I have called ATT they say that it is not their issue. I have replaced the T1 card 9109-021-000-SA and I have rebooted the CSU. Any Ideas on anything else it could be.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Was it working before? If you watch the trunks in maintenance, what causes them to busy out?
|
|
|
|
|
Joined: Jul 2010
Posts: 185
Member
|
|
OP
Member
Joined: Jul 2010
Posts: 185 |
Well if I return all the channels to service and they return to idle. As soon as they call out each channel gets busied out.
|
|
|
|
|
Joined: Jul 2010
Posts: 185
Member
|
|
OP
Member
Joined: Jul 2010
Posts: 185 |
you think it could be the CSU. Its A Verilink
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
When you return them to service, try making some incoming calls before they all busy out.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Sure it could be the CSU. But, there are other things to try, as well. As fifty5footer asked, WAS IT WORKING at some point? Or has it been happening for several months? John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jul 2010
Posts: 185
Member
|
|
OP
Member
Joined: Jul 2010
Posts: 185 |
well about a month ago i reboot it and it was fine until this week and now the channels just busy when atempt to access them
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
What lights do you get on the T-1 card? What lights at the NIU?
|
|
|
|
|
Joined: Jul 2010
Posts: 185
Member
|
|
OP
Member
Joined: Jul 2010
Posts: 185 |
sync is amber and red alarm on the t1 card and on the csu before i rebooted eq loss and net loss were lit but now just the power is. its a Virlink esf csu.
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Amber=no sync
Red alarm means this end is down (problem is here) -- Yellow means problem at the other end.
To verify, try looping the T-1 pin 1--> 4 and pin 2--> 5.
All lights at the NIU and CSU should clear and go green.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
144
guests, and
298
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
