|
|
|
|
Joined: Nov 2008
Posts: 32
Member
|
OP
Member
Joined: Nov 2008
Posts: 32 |
Hello there. I started working for a small office and they have a MiTel 3300 mxe server connected to a couple of SX2000 cabinets.
They usually swap extensions by moving the wire pairs on the 110 block to the corresponding new desk jack.
I know that with an inter-tel system this can be done by admin station. Is this possible with this mitel system?
Thanks.
|
|
|
|
|
Joined: Mar 2010
Posts: 77
Member
|
|
Member
Joined: Mar 2010
Posts: 77 |
Yes look in the maint commands.
Move swap (number) with (number)
|
|
|
|
|
Joined: Nov 2008
Posts: 32
Member
|
|
OP
Member
Joined: Nov 2008
Posts: 32 |
Is there a feature code you can provide, or is that forbidden on this site?
|
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
|
Member
Joined: Sep 2008
Posts: 392 |
You have to be able to log into the system programming and then go to maintenance and enter the command move swap. The phones need to be the same kind of phone too so you can't swap a digital phone with an analog.
|
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,676
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
119
guests, and
17
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
