|
|
|
|
Joined: Oct 2001
Posts: 1
Member
|
OP
Member
Joined: Oct 2001
Posts: 1 |
Does anyone know how to connect a DSS consol to a Onyx VS KSU? I have tried several configurations but the DSS won't work. The manual says that it is a two port device but doesn't say anywhere how to wire it up!
Thanks, Paul
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
It has to be the even port. Then it will automatically be assign to station 300.
You can not install a DSS on a expansion cabinet.
Hope this helps
dtmf
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Sep 2001
Posts: 6
Member
|
|
Member
Joined: Sep 2001
Posts: 6 |
I always install the dss on port 302. you have to leave the next port unwired.I use a red marker on the block.wire the first port normal and program both ports with circuit type 6 if i remember correctly.
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
118
guests, and
303
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
