|
|
Joined: May 2009
Posts: 4
Member
|
OP
Member
Joined: May 2009
Posts: 4 |
Replaced a hard drive in an NVM with one that is an older version, and doesn't have the presets for the Portrait. I have manually edited the transfer and page strings to make them work, but can't find the lamp string for MWI. Unless I missed it - I didn't see it in any documentation. I am missing the report printout of the system options from the previous install, which would show the string.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2004
Posts: 1,367
Member
|
Member
Joined: Jun 2004
Posts: 1,367 |
from the Portrait pocket guide
Single Line Phone Lift handset + Dial function code. Function Codes: SLTs set for Dial Plan 1, dial 69. SLTs set for Dial Plan 2 and “0†is the programmed entry for Automatic Line Access Code (Program 20 [D.]), dial 959. SLTs set for Dial Plan 2 and “1†is the programmed entry for Automatic Line Access Code (Program 20 [D.]), dial 059.
|
|
|
|
Joined: May 2009
Posts: 4
Member
|
OP
Member
Joined: May 2009
Posts: 4 |
Thanks, but I'm looking for the string the voicemail (NVM-22) uses to relay on/off and # of message parameters to the Portrait for stations whose users have new message/s in their mailbox. There is no OOB SMDI so it is done thru the port interfaces (vm stations)as an intercom dial string I think the codes and feature button you referenced are used to cancel "call me" indictors from an individual user on the system, and can only be done from the station with the lamp active.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|