web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#118795 10/26/10 02:32 PM
Joined: Oct 2007
Posts: 3
wr48 Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 3
Acquired a Nitsuko 28I system for free. I understand to connect the telephones and lines you need something called a DDK cable? Part number 82492. Does anybody know where to get one of these. I want to avoid spending money, so is it possible to connect without one of these cables?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#118796 10/27/10 07:45 AM
Joined: Jun 2004
Posts: 1,367
Member
*****
Offline
Member
*****
Joined: Jun 2004
Posts: 1,367
not really


[Linked Image from i26.servimg.com]
TouchPoint Networks.

Serving the Northwest Since 1991
NEC Shoretel Zultys T3 Tadiran
#118797 10/27/10 07:47 AM
Joined: Aug 2009
Posts: 278
Member
Offline
Member
Joined: Aug 2009
Posts: 278
You can make one using an apple printer cable (8 pin mini-din male connector) and a d-sub 9 pin female connector (9 pin serial RS-232 connector) that you can find in radio shack. The pinout is in the Nitsuko manual. The Sun keyboard cable also has the 8 pin mini-din male connector. You can salvage the 9 pin serial connector from an old modem cable. Connect the cables using scotch-locks, beanies or elecric tape if you must.


Vaya con Dios amigos!
Butch
#118798 10/27/10 07:52 AM
Joined: Aug 2009
Posts: 278
Member
Offline
Member
Joined: Aug 2009
Posts: 278
But that is only half your problem because you have to have the NEC 28i/124i Windows PC program too. Just having hyperterm or procomm won't work. You can reset the password to default by removing the silver coin battery from the system.

It is much easier just to program the system through a phone. The manual is available online. Just google it.


Vaya con Dios amigos!
Butch
#118799 10/27/10 08:11 AM
Joined: Aug 2009
Posts: 278
Member
Offline
Member
Joined: Aug 2009
Posts: 278
But the fun is just beginning. If you also have the Vanguard voice mail system, you need a different cable for that. You also need the dos based NEC Vanguard voicemail admin program. The Vanguard cable uses a DB9 female connector (9 pin serial connector) at one end and an "RJ-45" connector at the other. Again the manual is available online and contains the pinout.


Vaya con Dios amigos!
Butch
#118800 10/27/10 08:26 AM
Joined: Aug 2009
Posts: 278
Member
Offline
Member
Joined: Aug 2009
Posts: 278
OOPS! The cable you asked about is the one that connects the line and extension cards to an expansion block like, for instance, a 66-block. You can google this part no. and buy one for about $45-$50. You could possibly find some small black connectors that would fit these pins in a computer store. They are similar to the connectors used in a PC computer for the power switch, reset button, sound header and USB header.

Also you might go back to wherever this system came from and see if the cable is still there. If the cable is already punched down to a 66-block, then take that too. If the cable was cut off outside the system box, then the connectors are still inside the system. They are small blue plastic rectangles with two wires going to each one. Just hook them up to a 25 pair cable or punch them down to a 66-block. It helps here if you know the telco color code: bogbrs wrbyv


Vaya con Dios amigos!
Butch
#118801 10/27/10 04:54 PM
Joined: Oct 2007
Posts: 3
wr48 Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 3
ok well I think I found a ddk connector on ebay. The only thing is the guy selling it said it is for the portrait system but the connector he is selling has the same part number as the one for the 28i system. are connectors compatible across systems?

#118802 10/28/10 04:09 AM
Joined: Aug 2009
Posts: 278
Member
Offline
Member
Joined: Aug 2009
Posts: 278
please provide a link to the auction or post a picture of the cable. Hint: does it have 25 little blue plastic connectors at one end?


Vaya con Dios amigos!
Butch
#118803 10/28/10 04:11 AM
Joined: Aug 2009
Posts: 278
Member
Offline
Member
Joined: Aug 2009
Posts: 278
like i tried to point out in previous posts, your challenge goes well beyond just getting the right connector. Did you get a voice mail system (separate box) with the Nitsuko system? Are you planning on adding voice mail?


Vaya con Dios amigos!
Butch
#118804 10/28/10 07:40 AM
Joined: Jun 2004
Posts: 1,367
Member
*****
Offline
Member
*****
Joined: Jun 2004
Posts: 1,367
Portrait DDK cables are 4 wire the i-series are 2 wire. They will not work.

Is this for your business, or a pet project for your house?

The i-series is a rather powerful system. If it is for your business, I would recommend Spending 2-3 hundred dollars, get a certified tech in there, and have them address your needs. $500 really isn't too much to invest in your livelyhood, and besides, you got a free piece of hardware.

As a forwarning, once you get this system hooked up you are going to find that you are not going to get much more than general user info on here. (read as: we are not going to program the system for you a post at a time)


[Linked Image from i26.servimg.com]
TouchPoint Networks.

Serving the Northwest Since 1991
NEC Shoretel Zultys T3 Tadiran
Page 1 of 2 1 2

Moderated by  JWRacedog 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5