|
|
Joined: Mar 2004
Posts: 253
Member
|
OP
Member
Joined: Mar 2004
Posts: 253 |
I've installed a Norstar MICS r5 with a NAM replacing an old bcm. I get inbound calls on a t1 via DID assigned to the target lines. I make outbound no problem. I call another persons phone and nam pics up no problem. I've changed the park prefix from 1 so I could change the DNs to start with 1. THE ONE AND ONLY (minus the profanity)problem I'm having is when you call a target line assigned to a phone the main greeting picks up and not the personal one. The NAM is not set to pic up any lines but it still pics up any way. SOMEONE PLEASE HELP ME!!!!!!!!!!!!!!!!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: May 2003
Posts: 50
Member
|
Member
Joined: May 2003
Posts: 50 |
Make sure that the DRT to prime is not reverting to the vmail DN in fewer rings than the Call Forward No Answer on the extension. Insure that the prime set for your target lines are the extensions that the lines are assigned to.
|
|
|
|
Joined: Apr 2002
Posts: 305
Member
|
Member
Joined: Apr 2002
Posts: 305 |
The NAM that you have is an older one that will required a patch to be installed on it to work with MICS 5.0 and above ,if you have MICS 4.1 or below it will work fine.Contact your vendor that sold you that NAM for the patch other than that you will need to pay for it to get from another vendor.Thats my opinion.
|
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
OP
Member
Joined: Mar 2004
Posts: 253 |
I do have the drt to prime at the correct amount of rings and I think sam is correct. Does anyone know where to get the patch.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
164
guests, and
279
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|