|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
OP
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I've been asked to add a T-1 to an MICS v6.1.
Is ESF-B8ZS w/wink the config I am looking for. Also are there any conflicting numbers I should worry about on incoming DID's or can I convert any incoming number. Are there any other things I should watch out for?
Thanks in advanced.
------------------
Bound to cover,
Just a little more ground.
|
|
|
|
|
Joined: Feb 2004
Posts: 454
Member
|
|
Member
Joined: Feb 2004
Posts: 454 |
you're good with that setup. if you need help email me. your station numbers don't even have to match your did's. you set your target lines to accept the did and route to whatever extension. multiple extensions can receive multiple did's. actually pretty nice.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
OP
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Thanks for the support. Incomming DID to multiple staions is a nice feature, I usually have to setup a virtual & place it on different stations. GOOOOOOOO Nortel!
------------------
Bound to cover,
Just a little more ground.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
OP
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I know I have to program the target lines, but do they have to appear on the phone? Or will they ring to the ICM button.
------------------
Bound to cover,
just a little more ground.
|
|
|
|
|
Joined: Aug 2003
Posts: 5,149
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,149 |
Target lines can be programmed to ring only, appear & ring, or appear only. Whatever you want! ------------------ North Florida Communications
|
|
|
|
Forums84
Topics93,879
Posts637,001
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
76
guests, and
34
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
