|
|
Joined: Apr 2005
Posts: 3
Member
|
OP
Member
Joined: Apr 2005
Posts: 3 |
We have 2 PRI's. We are only getting calls on one of the PRI's. When the good PRI is busy, callers experience a busy signal. The LEC monitored the d channel and the Norstar was giving a cause code of 21. Any advise?
Jim O
|
|
|
|
|
Joined: Feb 2003
Posts: 27
Member
|
|
Member
Joined: Feb 2003
Posts: 27 |
Have you frogged the circuits to determine if DS1 is good ?
|
|
|
|
|
Joined: Apr 2005
Posts: 3
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 3 |
Not yet, the system is in Seattle and we are having a long distance love affair going on. What I did try last night though was the following: I was dialed into the RAD on channel 1, I placed channels 2-23 in "Near end out of service". Made a call to a known good DID and got a busy signal. I placed channel 23 in idle and got fast busy, I assumed my call to the DID would be answered on channel 23, it was not. I released 22, 21, 20... the same fast busy. Not until I got down to releasing channel 3 did I get calls. My next step will be to frog the circuits. Thanks for the help, Jim O
Jim O
|
|
|
|
Forums84
Topics93,876
Posts636,983
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
