|
|
Joined: Apr 2005
Posts: 6
Member
|
OP
Member
Joined: Apr 2005
Posts: 6 |
I wnat to activate the caller ID function. I have a CICS system with CI card. The phone company says my caller id is already turned on (has been for years). FYI - I saw a note in in the manual that said to hit "Feature 811". All it does when I do that is say "No Calls". What is wrong and what do I need to do now?
Thanks in advance.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 26
Member
|
|
Member
Joined: Apr 2005
Posts: 26 |
|
|
|
|
|
Joined: Apr 2005
Posts: 6
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 6 |
I jsut upgraded last a year or two ago but I can't remember the version number. Is there a way to tell without shutting down?
|
|
|
|
|
Joined: Oct 2002
Posts: 279
Member
|
|
Member
Joined: Oct 2002
Posts: 279 |
You can pull the front cover off and look at the sticker on the software or you can get into programming under Maintenance>System Version.
|
|
|
|
|
Joined: Apr 2005
Posts: 6
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 6 |
Hate to sound as ignorant as I am with this...but...I used the "admin" password to get to the "maintenance" menu. Problem is, it does not get to a maintenance mennu. Is there another default password that does?
|
|
|
|
|
Joined: Oct 2002
Posts: 279
Member
|
|
Member
Joined: Oct 2002
Posts: 279 |
yes, but that password is not given out on public forums on this site, check the sticker on the software card.
|
|
|
|
|
Joined: Apr 2005
Posts: 6
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 6 |
ok - I found it - when I go to MAINTENANCE, SHOW, SHOW it says "30AGK01 NAT".
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Moderator-Nortel
|
|
Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
When you hit Feature-811 and it says "NO CALLS" was your phone ringing? For F811 to work you need: 1) Your phone ringing with incoming call. 2) Phone needs to have rung once plus time for caller ID to come in. If you hit F811 before ID comes in it will say "NO CALLS". If that happens then hit the ringing line after a short delay. 3) You need to set up caller ID info in the programming.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Oct 2002
Posts: 279
Member
|
|
Member
Joined: Oct 2002
Posts: 279 |
Ok, cool. That's a CICS 2.0 expanded. 1st of all the lines will need to appear and ring on the sets or you will have to use the F811 code.
|
|
|
|
|
Joined: Apr 2005
Posts: 6
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 6 |
Hey - you're right, it works! But, isn't there a way to have the caller id info automatically display without having to type "feature 811" each call?
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
73
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
