Questions about setting up PRI for MICS

Print Thread

Rate Thread

Questions about setting up PRI for MICS #123413 05/04/05 11:29 AM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting OP Moderator-Comdial, ESI, Voicemail, Cisco
OP 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	I have a customer who's getting ready to order a PRI for their MICS, and they had a couple questions the telco was asking that I couldn't find the answer to. I only had best guess, and I need to get the right answer. 1. Is outpulsing DTMF? (My guess is yes, as that's how it's been for other PRI's I've done.) 2. Wink, Delay, or Immediate Start? (My guess is wink. That's what it's been for other PRI's I've done.) Thanks! ------------------ \| Signal Communication Systems - Fresno, CA \| \| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Questions about setting up PRI for MICS #123414 05/04/05 04:41 PM
Joined: Aug 2004 Posts: 9,157 Likes: 16 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,157 Likes: 16 SOUTH TEXAS	DTMF and wink are both correct. Programming gets a little funky if you are not using all 23 B channels.

Re: Questions about setting up PRI for MICS #123415 05/04/05 06:08 PM
Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA 5years&counting OP Moderator-Comdial, ESI, Voicemail, Cisco
OP 5years&counting Moderator-Comdial, ESI, Voicemail, Cisco Joined: Jun 2004 Posts: 4,552 Visalia, CA, USA	Those two settings are not programmable on the MICS, right? I don't remember seeing any place to change it. I'm assuming this is just how it is (which is fine with me). They are doing a full 23B+D, so no trouble there. ------------------ \| Signal Communication Systems - Fresno, CA \| \| Telephone Systems, Voicemail Syste... & Data Cabling - Central Valley, CA

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Questions about setting up PRI for MICS