|
|
Joined: Apr 2006
Posts: 1
Member
|
OP
Member
Joined: Apr 2006
Posts: 1 |
Hello all. I'm relatively new to the telecom industry (1 year) but I'm starting to work on new systems. Someone told me that the Nortel Compact ICS has 2 paging ports that could hook up to.
1st - Is this true?
2nd - If 'yes' which pin is it on the 66 block and
3rd - What is the command to page
4th - How do I have the two page simultaneously ie. from one extension?
I know these are a lot of questions, but I sure would appreciate any advice. Thanks so much.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Hello Walter,
Welcome to Tech Talk!
There is just one external page port on the CICS (or any Norstar for that matter). If you need more external zones, you will need to use a third party page adapter.
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Walter: If you need more than one zone to page to, you can get a Valcom V-2003A for 3-zones or V-2006A for 6-zones. But it uses a free CO port off the trunk card. You would set up a line pool or a route for that trunk port. Example: Line Pool-B with dial 8. Then pick up Intercom, dial an 8, this accesses the Valcom which gives a dial tone back, then dial 1,2, or 3 for the zone or 0 for all zones.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Jul 2005
Posts: 1,829
Member
|
|
Member
Joined: Jul 2005
Posts: 1,829 |
Like nt says Valcom has awsome paging equipment a bit pricy but good you might want to look into bogen as well
|
|
|
|
Forums84
Topics94,287
Posts638,786
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
