web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#128515 06/05/06 12:35 PM
Joined: Jun 2006
Posts: 512
jacktel Offline OP
Member
OP Offline
Member
Joined: Jun 2006
Posts: 512
Hi, called in today to look at bcm400, attendant console not able to f986 to mailboxes, will go if transfer to ext. first. System was working fine untill we had some big boomers roll thru. Checked button and it does have vm transfer on it, i reprgramed button anyway, no luck. There is ups on system ,time is correct. Can i shut system down and reboot without any problem? In maint. i have evt. code 453 o2820000, evt. 327-01 255 times, not sure what code is. any help

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

#128516 06/05/06 01:10 PM
Joined: Aug 2004
Posts: 1,609
Likes: 29
Admin
*****
Offline
Admin
*****
Joined: Aug 2004
Posts: 1,609
Likes: 29
Welcome to the board!

"Event ID: 327
Message:
This event is generated when the short-term alarm threshold has been surpassed in the Digital Trunk Interface module for the detection of controlled slip overflow. The module is in a no-new-calls state. DTCM = %1. "

I don't know what the code 453 is.

I would try the reboot like you suggested. Does the attendant have a CAP module? There are known issues with 7324's & CAPs transferring to VM. Usually the display will read "No party connect".

Good Luck!


[Linked Image from web.atcomsystems.ca]
Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
#128517 06/06/06 12:34 AM
Joined: Jun 2006
Posts: 512
jacktel Offline OP
Member
OP Offline
Member
Joined: Jun 2006
Posts: 512
Thanks for getting back,attendant has 7316e/with 2 klms,the bcm has a 1000 attached to it, for shut down is it proper to just use shut down in maint, program, wait 30 sec. and then restart?or do i have to pull plugs, and then replug at same time? will bcm restart without any further programing needed? or is it better to goe into maint. to check dti mod., is ther a clear alarm area there? thanks Jack

#128518 06/06/06 09:11 AM
Joined: Oct 2005
Posts: 4,685
Likes: 4
Member
Offline
Member
Joined: Oct 2005
Posts: 4,685
Likes: 4
Be sure your attendant is using F986 correctly.

Press F986 (or button) then DIAL mail mox number. You can't F986 then use a DSS button from the KIM.


Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990

Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,694
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,704 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
2 members (teleco, BobRobert), 110 guests, and 254 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5