|
Joined: Apr 2005
Posts: 194
Member
|
OP
Member
Joined: Apr 2005
Posts: 194 |
I have a companion system with 6 phones, not sure on how many wireless antennas this customer has, I could only find 3 of them, the green lights are on all the wireless units, I go into companion programming and it shows the phone extension plus 2 credits, when the system lost power the customer stated it read needs UTAM codes, what are they and how do we get them...please help..
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
The system has lost its activation keycode.
Companion has been discontinued for quite some time. I know of no way to recover the code.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Dec 2003
Posts: 31
Member
|
Member
Joined: Dec 2003
Posts: 31 |
Hey Marv,
I've got a newly upgraded from 4.1 to 7.0 that displays the same message (UTAM code required).This customer does not have Companion,we just upgraded to get the last two fiber ports for digital station additions. The system seems stable. Is this just a bogus message?
Also could you advise me on CP 150.
I am using a telephone to administer the Call Pilot,and need to add the keycodes for more mailboxes. Along with the hidden unpublished F983 codes is there one to obtain the system id of the Call pilot?
If this contains any password info not suitable for publishing would you please advise. I will provide you with my email address for that info.
Thanks,
Duke
Doing the right thing is not always easy....but doing the right thing is always the right thing to do!
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
I suspect that during your upgrade (proceedure issue) your sys id changed. XC comes with UTAM code and it is installed automatically during initial startup, but it is specific for a sys id. If your sys id changed your UTAM is no longer valid. If your not running companion you have no worries.
CP sys id: dial 44 from the main CP menu.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Dec 2003
Posts: 31
Member
|
Member
Joined: Dec 2003
Posts: 31 |
Marv,
Thank You Very Much!
I assumed that it was o.k. since it cleared and did not pop back up, but I did not know.
Thanks for CP info as well.
Does the 44 code require a password,or is it just the installer password?
Thanks,
Duke
Doing the right thing is not always easy....but doing the right thing is always the right thing to do!
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
85
guests, and
308
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|