|
|
|
|
Joined: Apr 2007
Posts: 1
Member
|
OP
Member
Joined: Apr 2007
Posts: 1 |
Hi all, this is my first post here.
I've got my hands on a used MICS with Rel 1 T1 software which I'd like to upgrade to 4.1. If I don't care to retain the current config, can I just plug in the NVRAM cartridge with software card, or do I need the upgrade tool?
I have an option to get my hands on a used 4.1 XC with nvram cartridge. The 'XC' part simply means I can expand to 10 modules as opposed to 6? Or are there any restrictions/hardware requirements when using XC software?
Any help greatly appreciated!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
Welcome to the board Shojin. If you don't want to keep the info, just insert an NVRAM 2 cartridge with the 4.1 software and turn up the power. As for the XC software if you don't need to grow that much and don't require companion, it will probably save you money. XC costs a little more.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (dans, erniejoey),
157
guests, and
298
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
