|
|
Joined: Feb 2006
Posts: 598
Member
|
Member
Joined: Feb 2006
Posts: 598 |
Customer does have a CI card and does not have the IRAD enabled on his software. Does have CLID set to Y and still no worky. I advised him to contact is telco provider to confirm Caller ID being sent.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2007
Posts: 29
Member
|
|
OP
Member
Joined: Jun 2007
Posts: 29 |
Waiting on Phone Co to confirm that CID is still working. Will let you know.. Thanks Nickels for your Help.. A+++
|
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
Also...and I found this out the hard way...certain lightning/voltage protectors installed on the C.O. lines will prevent CID from being passed through.
D. Ocean
Miami, FL
|
|
|
|
|
Joined: Jun 2007
Posts: 29
Member
|
|
OP
Member
Joined: Jun 2007
Posts: 29 |
Phone Compnay confirms, that caller id Signal is being sent. Also set up a different phone to punch down block and CID is working Fine. Just not coming through on the CICS.
|
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Then you have programming issues. There are several places to set this up in programming and if you are doing this yourself you are going to need the install manuals not the coordinator manuals as that book is for endusers to do basics like names, time changes, speed dials, etc.
|
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
also remember caller id info on POTS line comes after 1st ring
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
also remember caller id info on POTS line comes after 1st ring If not 2nd... Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Jun 2007
Posts: 29
Member
|
|
OP
Member
Joined: Jun 2007
Posts: 29 |
I have the Manual just not sure where to look as you can see from NICKELS he has gone in and looked and everythings that his is looking at seems to be set correctly.
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
Everything that I can see from the System Admin Password is OK. You can backdoor the RADs and see the set configuration, but cannot access MNTC or Line programming. I have advised Kurt to either call in a tech or pay for the IRAD software and then someone could dial in and confirm his programming.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Your exts has to be programmed for lines A&R on that set otherwise no CID ever unless VM transfers to Icm. Never answer on first ring. Let it ring at least 2 times.
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
79
guests, and
310
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
