|
Joined: Oct 2003
Posts: 694
Member
|
OP
Member
Joined: Oct 2003
Posts: 694 |
I have a MICS system and would like to know if I can renumbers the hunt groups so I can use the digit 4 for another purpose. They start at 405 and go on up from there.
Thanks Shawn
Shawn Connect Telecom www.connecttelecom.us In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: May 2007
Posts: 231
Member
|
Member
Joined: May 2007
Posts: 231 |
should be able to just take the dn you want to use and change to the 400 series number should swap with hg dn
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
I don't think you can change the range (but try using the change DN feature). The HG range is set at start up. Normally they are in the 700's if you leave your DN range at start up to the default 2xxx range. You must have some unual DN numbers.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Oct 2003
Posts: 694
Member
|
OP
Member
Joined: Oct 2003
Posts: 694 |
I have 3 sites. 1 has 200, 1 has 300, 1 has 400. I am trying to make it so site 1 can call site 2 by dialing only 3 digits with routes and destination codes. When I dial 4--, it calls that hunt group.
Shawn Connect Telecom www.connecttelecom.us In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
There's your problem. You should have used 4 digit extension numbers.
22xx, 23xx, 24xx.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Oct 2003
Posts: 694
Member
|
OP
Member
Joined: Oct 2003
Posts: 694 |
They are bent on having the same ext numbers as they do now. So I was just hoping I could change those numbers. We will find a work around I guess.
Thanks for the help
Shawn Connect Telecom www.connecttelecom.us In matters of style, swim with the current. In matters of principle, stand like a rock. Thomas Jefferson
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Sometimes you have to say "We can't do that and here's why".
Good Luck
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
Member
Joined: Apr 2001
Posts: 1,390 |
Marvs right, multiple site are easier to configure with 4 digit dialing. We build ours, 22xx, 33xx, 44xx; this might be a work around for you.
|
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
Member
Joined: Mar 2004
Posts: 253 |
it will work with three set a number to go directly to vm and set up your dest codes and routes accordingly
|
|
|
Forums84
Topics94,262
Posts638,696
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
161
guests, and
240
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|