|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
BCM 400, 4.0. I have a hunt group set up for one line. If that line gets a call, several dn's will ring. The HG is a broadcast group.
I added a couple of dn's to the hunt group. They show up in the list as "Appear and Ring". All of the other sets show "Ring Only". I don't see where to change these latest additions to be ring only.
There are no line appearances on these phones, but since this line now appears and rings, it also takes up a button on the phones and overwrites the previous button programming.
How can I change it to Ring Only on these sets?
Thanks. Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: May 2007
Posts: 231
Member
|
Member
Joined: May 2007
Posts: 231 |
In the HG programming section
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
Duh! I found it. Double click on the set in the list. Select Ring Only.
I knew it was in there somewhere. Too many things on my mind. Thanks.
Jim
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|