Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Call Pilot - 2.0
#140812 10/17/08 07:55 PM
Joined: Dec 2003
Posts: 2,069
Moderator-Nortel
OP Offline
Moderator-Nortel
Joined: Dec 2003
Posts: 2,069
New install - CICS 7.1 with Call Pilot 100 2.0

Set up my laptop just like I always do.
Tried to get into the CP.
Nothing - won't even ping.
Tried the telset codes - nothing.
I have 3 digit extensions. I still need to initialize CP.
Just out of curiousity I try 12xxxx instead of 102. It gives me the admin screen.
Humm - not init yet, on a 3 dig system - How can that be. And why can't I get in on my laptop?
I do a re-install. And I connect up with serial cable.
Address is: 10.1.0.1 mask is: 255.255.0.0
No wonder I can't even ping it.

So I change the IP/mask back to default with the serial cable. Then reboot.

Now I can ping the CP but still no access - 'Page not displayed'.
But I can get into the CP using telset.

On a reboot - I check and the address and mask are correct. I CAN ping it. But no access.
Any feedback??


If CON is the opposite of PRO
Then what is the opposite of Progress?
Equipment and Telephones
Re: Call Pilot - 2.0
#140813 10/18/08 06:05 AM
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
Why is 10.1.0.1 if CP default is 192.168.110.10?
Set your browser to 192.168.110.11.

Re: Call Pilot - 2.0
#140814 10/18/08 07:40 AM
Joined: Oct 2005
Posts: 4,681
Member
Offline
Member
Joined: Oct 2005
Posts: 4,681
Obviously this is a used CP, if the address was not default.

You might want to do a Telnet Reinstall.


Marv CCNA, CTUB
TeleMarv Services
Providing telecommunication solutions in Ottawa Canada since 1990
http://www.telemarv.ca
Specializing in Nortel Norstar, BCM and Allworx VoIP Servers
Re: Call Pilot - 2.0
#140815 10/18/08 06:39 PM
Joined: Dec 2003
Posts: 2,069
Moderator-Nortel
OP Offline
Moderator-Nortel
Joined: Dec 2003
Posts: 2,069
Quote
Originally posted by telemarv:
Obviously this is a used CP, if the address was not default.

You might want to do a Telnet Reinstall.
I agree, Marv, it must have been used.

What is a Telnet Reinstall?
How is that diff than a normal re-install using the 983??
And I thought the 983 re-install would put the address back to default. ???


If CON is the opposite of PRO
Then what is the opposite of Progress?
Re: Call Pilot - 2.0
#140816 10/19/08 01:00 PM
Joined: Oct 2005
Posts: 4,681
Member
Offline
Member
Joined: Oct 2005
Posts: 4,681
Sorry I meant telset and re-reading your 1st post you already did that.

I've found 2.0's to be finnicky. I'm at a loss as to why the browser does not come up. Re-check your laptop config. Are connected direct (crossover cable) or through a router? Try rebooting your laptop with it connected to the CP.


Marv CCNA, CTUB
TeleMarv Services
Providing telecommunication solutions in Ottawa Canada since 1990
http://www.telemarv.ca
Specializing in Nortel Norstar, BCM and Allworx VoIP Servers
Re: Call Pilot - 2.0
#140817 10/19/08 06:23 PM
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
Where that 10.1.0.1 came from? Connect your computer with serial cable to RS-232 and set it up as VT-100, 9600, no parity, 1 stop bit. Power up a CP and watch screen for IP address to modify. Press
"Enter" within 5 sec. You are going to see an existing IP and be able to modify.


Moderated by  MooreTel, NTlayoff, Z-man 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Unisons to give away
by RUSS K. - 09/21/20 01:52 AM
problem with a new CO line on a Panasonic KX-T30810
by LenShustek - 09/20/20 09:55 PM
Issue with tenants/trunk groups
by EV607797 - 09/20/20 07:46 PM
CenturyLink Rebrands Three Ways.
by dexman - 09/19/20 10:44 PM
SV 9100 CP 10
by teldata1 - 09/18/20 05:10 PM
Who's Online Now
23 members (nortelvoip, Meyery2k, EV607797, Mercenary Roadie, pvj, BobRobert, hbiss, newtecky, LenShustek, RUSS K., Professor Shadow, RATHER BE FISHING, Tip&Ring, Touch Tone Tommy, C5Z, hitechcomm, Hofman telekom, Bob3470, metelcom, Yoda, justbill, teldata1, Ruben), 190 guests, and 45 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,953
Posts637,232
Members49,346
Most Online5,661
May 23rd, 2018
Today's Birthdays
boots921, Don Mynes, glennlandrew, leonard kryston, maninquestion, roky4rach
Newest Members
Ray Mar, NKol423, Rob McKay, s0397, Craypaz
49346 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 31
teleco 12
hbiss 9
ABLE1 7
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners