|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
OP
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
New install - CICS 7.1 with Call Pilot 100 2.0
Set up my laptop just like I always do. Tried to get into the CP. Nothing - won't even ping. Tried the telset codes - nothing. I have 3 digit extensions. I still need to initialize CP. Just out of curiousity I try 12xxxx instead of 102. It gives me the admin screen. Humm - not init yet, on a 3 dig system - How can that be. And why can't I get in on my laptop? I do a re-install. And I connect up with serial cable. Address is: 10.1.0.1 mask is: 255.255.0.0 No wonder I can't even ping it.
So I change the IP/mask back to default with the serial cable. Then reboot.
Now I can ping the CP but still no access - 'Page not displayed'. But I can get into the CP using telset.
On a reboot - I check and the address and mask are correct. I CAN ping it. But no access. Any feedback??
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
Why is 10.1.0.1 if CP default is 192.168.110.10? Set your browser to 192.168.110.11.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Obviously this is a used CP, if the address was not default.
You might want to do a Telnet Reinstall.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
OP
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Originally posted by telemarv: Obviously this is a used CP, if the address was not default.
You might want to do a Telnet Reinstall. I agree, Marv, it must have been used. What is a Telnet Reinstall? How is that diff than a normal re-install using the 983?? And I thought the 983 re-install would put the address back to default. ???
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Sorry I meant telset and re-reading your 1st post you already did that.
I've found 2.0's to be finnicky. I'm at a loss as to why the browser does not come up. Re-check your laptop config. Are connected direct (crossover cable) or through a router? Try rebooting your laptop with it connected to the CP.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
Where that 10.1.0.1 came from? Connect your computer with serial cable to RS-232 and set it up as VT-100, 9600, no parity, 1 stop bit. Power up a CP and watch screen for IP address to modify. Press "Enter" within 5 sec. You are going to see an existing IP and be able to modify.
|
|
|
Forums84
Topics94,262
Posts638,696
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
154
guests, and
244
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|