|
|
|
|
Joined: Feb 2009
Posts: 25
Member
|
OP
Member
Joined: Feb 2009
Posts: 25 |
I HAVE A NEW TYPE OF PRI INSTALLED FROM A CERTIN VENDOR ITS CALLED A DYNAMIC T IS THERE ANY REASON IF A SET HAS NO DID ON IT I CAN FORWARD MY SET OUTSIDE BUT IF I HAVE A DID ON A SET AND FORWARD THAT SET IT WONT DIAL OUT MICS 7.1
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Does that one DN have ALLOW REDIRECT = YES ?
The phone that doesn't work, does it have access to the line pool?
You might also look at the OLI# - either put it in or take it out. See if it makes any difference.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Make sure all your DID were ported over new PRI. Can you receive a call on DID at all? I had a client with PRI over DSL and they wouldn't allow to Forward DID externaly as well. You have to call them up. Its a Programmable featuter on their router.
|
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
157
guests, and
170
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
