|
|
|
|
Joined: Sep 2009
Posts: 16
Member
|
OP
Member
Joined: Sep 2009
Posts: 16 |
I recently converted a Norstar from POTS to PRI. Everything went smooth, however when the customer wants to make a local call they have to dial a 1 the area code and then the number. Is there a programming shortcut to eliminate the need to dial these extra digits on a simple local call? Thanks in advance for any responses.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: May 2008
Posts: 62
Member
|
|
Member
Joined: May 2008
Posts: 62 |
go into your dialing plan and then add the dgits that correspond to you local number plan and that should take care of it.By default 1 + 10 digits is all that is there.
|
|
|
|
Forums84
Topics93,967
Posts637,414
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (tech3500, Curlycord),
106
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
