web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2010
Posts: 5
AMSTech Offline OP
Member
OP Offline
Member
Joined: Jan 2010
Posts: 5
I am working with a customer that is having a problem with their Norstar Plus MICS system. When they dial their internal extensions like 4xxx there is no issue, or dial 717/434-4144 there is no issue; but when they connect to an IVR system and enter the digit 4 it is not recognized -- it shows on the phone display. I have checked all configurations and can find nothing that would make only the number 4 be affected.

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
Never heard of this, assuming all sets on system.
Hard to say if software glich or not, doing a startup and re-program clears most gliches.
Assume you rebooted system?

Starnge it works to dial out but not when connected.
Unless of course your lines are set to Pulse and not Tones....you did check that right?


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada




Joined: Jan 2010
Posts: 5
AMSTech Offline OP
Member
OP Offline
Member
Joined: Jan 2010
Posts: 5
Yes did reboot.
Yes did check lines -- all set to tone.
Problem only exists with number 4 when in an IVR system -- I agree it is real weird, but I have seen it.

Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
What about when you call into a voice mail system instead of IVR?
If your site as AA then call in and test.

Make sure to call a few different sites in case its them and not your site.
Try also going online at Demarc with a butt set and see if you hear the 4 being pressed.


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada




Joined: Jan 2010
Posts: 5
AMSTech Offline OP
Member
OP Offline
Member
Joined: Jan 2010
Posts: 5
Have tried 3 different IVRs and followed with cell phone call to them (verifying that 4 works in IVR).
Problem exists on all phones at site (20).
Have not tried butt set at Demarc yet.

Joined: May 2007
Posts: 231
Member
Offline
Member
Joined: May 2007
Posts: 231
what release of software.

Joined: Jan 2010
Posts: 5
AMSTech Offline OP
Member
OP Offline
Member
Joined: Jan 2010
Posts: 5
30NdG00 NAT

Joined: May 2007
Posts: 231
Member
Offline
Member
Joined: May 2007
Posts: 231
i guess i would monitor the copper trunk to verify a DTMF tone was being generated..also try at demarc with but set and verify its the switch or far end issue... also try a f808 for long tones to see if that clears it up.

Also kinda leaning towards far end since telco seems to be able to recognize 4's dtmf


Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5