|
|
Joined: Dec 2003
Posts: 86
Member
|
OP
Member
Joined: Dec 2003
Posts: 86 |
Have a BCM 400 not powering up, Customer had a PC power supply installed it powered up BCM, power came up then shut off after 20 seconds. May not be proper voltage. Is it worth purchasing a duplicate power supply and trying it. May have received power surge. Any luck with these comming back on line.
Thanks
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Moderator-Nortel
|
|
Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
You should put in a power supply that is meant for BCM. Any other power supply may not have the same specs and same power ratings - May not have the same pin layout which means you could damage something.
Power up for 20 sec then dies - sounds like the PC power supply is under-rated, or you have a major problem in the BCM.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
|
Member
Joined: Feb 2007
Posts: 330 |
I have used PC power supplies in BCM's at Costco. Make sure that the wattage is the same or more. It should work.
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
|
Forums84
Topics93,970
Posts637,434
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, Curlycord),
107
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
