sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Panasonic Telephones & Systems 624 and TVS 95

I just installed a 624 with a new TVS 95 and I am experiencing some weird things.

1.) I have two ports setup for VM - Port 115/116. When someone calls in they get the custom recording, but if someone calls in immediately after that, they here the system greeting. I looked at the Port Settings via the serial port, and both ports are set the same way. Any ideas?

2.) The TVS 95 seems to be real slow at releasing itself. For instance, if I dial the VM, and hang up, I have to wait like 30 seconds before I can get into VM again.

------------------
Keith A. Murrey
Data Voice Solutions, ltd.

it sounds like your provider is not sending a CPC signal.
Call each port, 115 & 116 from an extension that does not have a mailbox associated with it and see how the TVS answers.
Gem

chk the intergration on the phone system ports also put ext 115 & 116 into a ring grp

Thanks guys.

I will try that out.

------------------
Keith A. Murrey
Data Voice Solutions, ltd.

Well - I put them in a ring group, and it is rolling over... BUT... still having the problem with the voicemail system taking forever to release the line.