|
|
Joined: Jun 2005
Posts: 1
Member
|
OP
Member
Joined: Jun 2005
Posts: 1 |
Hi
I am installing a Panasonic KX-TD1232 on an eircom PRI. I keep getting the error "CO not assigned" showing when I press the speed dial key no. 1, I have done everything in the manual. I just can't seem to get an outside line. Using prog 450 to assign PRI line to 30 channels has been done, the CRC is enabled and the prog 400 Outside Line Connection Assignment has been done. Eircom have tested the line and there doesn't seem to be a problem. Is there anything I am forgetting? I am a Telecomms engineering student installing the system as a favour for a friend. Any help would be appreciated.
Regards,
Clive Burke
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
Member
Joined: Oct 2001
Posts: 4,043 |
Clive, please complete your profile for us. I e mailed you a Tech. sheet on setting up the KX-TD 290 PRI card. Gem
|
|
|
|
Joined: May 2004
Posts: 324
Member
|
Member
Joined: May 2004
Posts: 324 |
hi clive did you remember that the pri lines start at line 25 so you would have to program sp key to co25 not as co 1 as in defult or you can set the line button as loop co prog 99 press a key dial 0 enter * press store then use this to test the line i take it that you dont have the software also you have error chk enabled has eircom got enabled also where in ire are you me in dublin .
|
|
|
Forums84
Topics94,285
Posts638,781
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
93
guests, and
169
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|