|
|
Joined: Nov 2003
Posts: 480
Member
|
OP
Member
Joined: Nov 2003
Posts: 480 |
i have a panasonic kxt 816, it came 4x8 and i added a 4c0 and an 8ext. when i try to access lines 5 & 6 it says not assigned. how do i assign the additional lines and stations. it seems that i have added a 4co to other systems and the lines came right up. i don't have a laptop with panasonic software.
thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You sure you aren't talking about an KXTD 816? You can program it with a set on jack 1. Use program 400 to assign lines to the system.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Nov 2003
Posts: 480
Member
|
|
OP
Member
Joined: Nov 2003
Posts: 480 |
sorry i do have a kxtd-816, and when i scroll through the programs i did not see 400. what is it called? i went through them a few times and never saw anything that said to add lines. however i did see one deal where it said lines and 12345678 were all in there.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
It's called (CO Connection)
Program 400 is for co lines that are connected to the system, check and make sure lines 5 and 6 are set to Connect, you may want to check 401 as well.
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: Nov 2003
Posts: 480
Member
|
|
OP
Member
Joined: Nov 2003
Posts: 480 |
I do remember seeing that program and i think that it had 12345678 displayed. if that is so then what else could it be. do i need to select the co's individually in 400? i'm going there after business hours so i am trying to get as much info as possible. thanks.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
all 8 will be in there but they make not be set to Connect
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: Nov 2003
Posts: 480
Member
|
|
OP
Member
Joined: Nov 2003
Posts: 480 |
Ok, so i will probably have to enter the co number and then select connect in order to enable it. That will help me I am sure so thanks again for the help.
|
|
|
|
|
Joined: Sep 2005
Posts: 9,285 Likes: 6
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,285 Likes: 6 |
You may also have to set 605+606 day/night access for each CO for each extension
|
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
do you have the cards assigned properly?
By default the CO lines are on bottom, extensions on top.
If that's not how you have them you can change it in program 109.
Reset the system after changing.
The middle jack on the CO card is for lines 5 & 6 and the bottom is 7 & 8You also have to make sure that the new CO lines are assigned to the sets your checking.
MrG
|
|
|
|
|
Joined: Nov 2003
Posts: 480
Member
|
|
OP
Member
Joined: Nov 2003
Posts: 480 |
THAT IS WHAT I NEEDED TO KNOW. I HAD THE POSITION OF THE CARDS WRONG. PROGRAM 109 FIXED THAT PROBLEM. THANKS FOR THE DETAILED INFO.
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (James D.),
181
guests, and
286
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
