web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Jan 2009
Posts: 94
Adam D Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 94
Okay so its been a while since i've done a TDA system. In the past I bought my clients the system via a local dealer so he naturally got it all setup for us, and the last time I did a system was about 2 years ago, a TDA100 in my own office.

Well obviously they made some changes and the TDA50G is what they sell now... so I bought that from a local distributor of mine (they sold it to me direct after i gave them my BTS dealer number).... so now i have this here and im not quite sure where to get the TDA50G software. I log into my BTS account but all i see is the unified console stuff and the SD card (5.0) files.... what happened to the maintenance console? Do they not use it anymore??? A little help is appreciated here.

Also, do i need to active the TDA50G to use it like i used to with the TDA100? (the person i bought it from activiated it for me, but in this case, i purchased the TDA50G direct from my distributor this time, not through a panasonic dealer, my distributor is authorized to sell me this product line, just not the TDE)

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jan 2008
Posts: 227
Member
Offline
Member
Joined: Jan 2008
Posts: 227
you have to download the new unified manintenance console software. The old stuff is gone from the site.


Tele-Net Technologies
Certified Panasonic dealer
Joined: Jan 2009
Posts: 94
Adam D Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 94
Yeah got it. I wrote that as I downloaded it. I see its built into that stuff now... now i just need access to the flash rom registration... guess i gotta call panacare or whoever they are now.

Joined: Jan 2008
Posts: 227
Member
Offline
Member
Joined: Jan 2008
Posts: 227
If you have a valid dealer & tech ID's you can register it on the panacare web portal


Tele-Net Technologies
Certified Panasonic dealer
Joined: Jan 2009
Posts: 94
Adam D Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 94
I cant login to panacare. I can login to BTS, no problems... but i don't have a pancare login/pass.. i tried my dealer ID and my tech id (which is basically the 5 digit then the 4 digit number) but it doesnt work...

Joined: Aug 2009
Posts: 1,116
Member
Offline
Member
Joined: Aug 2009
Posts: 1,116
do you have tech certificates for the tda,tde , ncp
TVA ,unified console ,Networking concepts & tda50G

I just followed the links and was to the point were I could reg systems....

You should Know Who your ASM is it would most likely be my guy....

Joined: Jan 2009
Posts: 94
Adam D Offline OP
Member
OP Offline
Member
Joined: Jan 2009
Posts: 94
Whats ASM??? I have certs for the following:

TDA50G
IP Networking Concepts
IP Product Webinar
Unified PC Maintenance Console Webinar

I don't know how to login to that panacare site though... like i said, i tried my BTS dealer # and then the tech id (when i login to bts i use a 9 digit number, which i think is my dealer ID and tech id?)

Joined: Aug 2009
Posts: 1,116
Member
Offline
Member
Joined: Aug 2009
Posts: 1,116
Your ASM is your Panasonic Sales Rep you would call
him and tell Him that your dealer and tech id won't let you on to reg your system...

Yours is most likely Dave Slowick he is the north east rep!!

Joined: May 2008
Posts: 144
Member
Offline
Member
Joined: May 2008
Posts: 144
So... if you don't have a tech, how could one obtain the unified software?

Joined: Jan 2008
Posts: 227
Member
Offline
Member
Joined: Jan 2008
Posts: 227
Your tech ID is four digits. On the panacare site you put your dealer id and your tech id in seperate fields, not one long number. If you have the certs you say you do then you should have dealer & tech id's


Tele-Net Technologies
Certified Panasonic dealer
Page 1 of 2 1 2

Moderated by  Carl Navarro, OBT 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,284
Posts638,771
Members49,765
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,457 Shoretel
188,313 CTX100 install
187,087 1a2 system
Newest Members
Nadisale, andreww, gohunt, Darrick, telecopippo
49,764 Registered Users
Top Posters(30 Days)
Toner 23
teleco 5
jc2it 4
dans 3
Who's Online Now
1 members (Toner), 144 guests, and 298 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5