atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems MOH for Telrad 816 analog systems

I have two Telrad 816 analog systems that we would like to add music on hold to. I have a manual that shows a schematic of how to do this. Does anyone know where a pre made wiring system can be bought. The schematic shows a 50 position dual row ribbon cable, a 1 to 1 600 ohm Audio Isolation transformer, two 1800 ohm 1/4 watt 5% resistors. It also states that in order to eliminate the "Tone on Hold" pins 45 and 3 should be shorted. Any assistance with this would be grately appreceated.

there anoter card you have to put in and there is a rca plug for it.

SOrry I didn't read the whole msg Again!!!!!!

I could find one for you in my warehouse No charge if I find one but give me a day or two. You can pay the $50 shipping cost because I do you e-bay people do. JUST KIDDING!!!

[This message has been edited by tony3866 (edited February 21, 2005).]

[This message has been edited by tony3866 (edited February 21, 2005).]

Thanks Tony, if you need me to pay shipping on it that would not be a problem at all or if you need payment for the part.