web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#172634 02/23/05 08:40 AM
Joined: Aug 2001
Posts: 166
commo23 Offline OP
Member
OP Offline
Member
Joined: Aug 2001
Posts: 166
I have 200 DID's on my telrad 400 switch.
Anyway, my DID first three numbers 461, 788, and 386. where the last 4 digits are 4600-4699, 6300- 6399. The problem I am having is making extensions 610-619 did's ending in 4610 through 4619.
I have it configured where in DID routing the DID numbers are 4600 through 4699, and in route table the incoming DID's are 461,788, and 386.
Somehow the 461 in the incoming did's is conflicting and will not allow the DID ending in 4610-4619 will not work. Is there a way I can make this work?


Erik

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#172635 02/23/05 01:39 PM
Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
Best way is contact your provider and get a new block of DID's.


------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

#172636 02/24/05 03:17 AM
Joined: Aug 2001
Posts: 166
commo23 Offline OP
Member
OP Offline
Member
Joined: Aug 2001
Posts: 166
I have had these DID's for over 2 years and if I change the DID's it would screw up a lot of people using these numbers. THere is no way the switch can fix this so that I can utilize the 10 DID's?

Erik

#172637 02/25/05 01:03 AM
Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
You have had these DID's for 2 years and just now there is a problem or they have never worked?
When you have a DID conflict many time you can get the provider to send you other non confilcting numbers so you can route them.
Try this ask your provider to change the sent digits for just these 10 numbers to 0610-0619 and route those in DID routing. You dont need to change the published number just the digits being sent.

------------------
ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits

[This message has been edited by SSPhone (edited February 25, 2005).]

#172638 02/25/05 04:01 AM
Joined: Aug 2001
Posts: 166
commo23 Offline OP
Member
OP Offline
Member
Joined: Aug 2001
Posts: 166
Why does it conflict? Should it be coonflicting? I know the first three digits are 461 and the following digits are 461X, i thought it was only suppose to recognize the first three digits and not the following 4 (excluding the very last digit).

Erik

#172639 03/04/05 12:09 AM
Joined: Sep 2001
Posts: 59
Member
Offline
Member
Joined: Sep 2001
Posts: 59
It looks to me as if your carrier is only sending 3 digits. Just to make it clear when you receive digits from a carrier its the last digits that are sent. Make sure you are programmed to four digits. if you have three digits can the conflict is in adding ext's with 600 that the number 6 is removed from intrusion in codes.

#172640 03/09/05 07:02 AM
Joined: Aug 2001
Posts: 166
commo23 Offline OP
Member
OP Offline
Member
Joined: Aug 2001
Posts: 166
It is configured as four digits and it wrks fine with the other DID's it is only these ten numbers.

#172641 03/10/05 01:52 PM
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
Make sure your DID conversion is set to yes in tie/DID group features.

If this is not set to yes the system will look at the flexible numbering plan. So some DID's will work but others might not. If you look at the DID that doesn't work it might have a conflick with something in that plan but one's that do work don't have a conflick.
If this setting is set to no DID look at the FLNP Plan 1ST then looks at the DID Table.
Also when you call the DID's that don't work do they go to the ATT. If they do I would link to the T-1 or PRI card and do a trace on it.
If thay don't check that setting.

[This message has been edited by tony3866 (edited March 10, 2005).]

[This message has been edited by tony3866 (edited March 10, 2005).]


Moderated by  SSPhone 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,112 Shoretel
187,717 CTX100 install
186,810 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
Who's Online Now
2 members (justbill, Curlycord), 55 guests, and 432 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5