atcomsystems.ca/forum Forums Other TDM Phone Systems Telrad Telephones & Systems Bad buzzing on multiple avanti stations

Print Thread

Rate Thread

Bad buzzing on multiple avanti stations #172768 03/22/05 02:30 AM
Joined: Feb 2005 Posts: 439 Chattavegas, TN Telradmaniac OP Member
OP Telradmaniac Member Joined: Feb 2005 Posts: 439 Chattavegas, TN	My company has a customer with a UNITe 400 v7.36. The cust is a foam manufacturer, and they have 5 Avanti extensions that have bad buzzing. one of these has been a problem child of ours(we have replaced phone, handset, handset cord, line cord, and I am preety sure we even replaced the card), but now others are acting up. They are on separate feeders, and separate cards on the system. I am onsite now and am going to eliminate the possibility of bad cable. If anyone has any ideas, please let me know. ------------------ Telradmaniac [email protected]

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Bad buzzing on multiple avanti stations #172769 03/22/05 02:32 AM
Joined: Feb 2005 Posts: 439 Chattavegas, TN Telradmaniac OP Member
OP Telradmaniac Member Joined: Feb 2005 Posts: 439 Chattavegas, TN	4 Avanti stations 1 SLT

Re: Bad buzzing on multiple avanti stations #172770 03/22/05 03:13 AM
Joined: Aug 2003 Posts: 1,281 Long Island, New York tony3866 Moderator-Telrad
tony3866 Moderator-Telrad Joined: Aug 2003 Posts: 1,281 Long Island, New York	Are you using bridging clips. Need Tech Support on any Telrad system

Re: Bad buzzing on multiple avanti stations #172771 03/22/05 03:47 AM
Joined: Feb 2005 Posts: 439 Chattavegas, TN Telradmaniac OP Member
OP Telradmaniac Member Joined: Feb 2005 Posts: 439 Chattavegas, TN	no

Re: Bad buzzing on multiple avanti stations #172772 03/22/05 03:52 AM
Joined: Mar 2001 Posts: 7,350 SLC, Utah (801-562-5576) dtmf RIP Admin
dtmf RIP Admin Joined: Mar 2001 Posts: 7,350 SLC, Utah (801-562-5576)	I would start by hooking up a jack right at the breakout, but I assume you are on site and doing that to eliminate wiring issues. Russ runs a local service and private tech center. [/url]

Re: Bad buzzing on multiple avanti stations #172773 03/22/05 10:35 AM
Joined: Feb 2005 Posts: 439 Chattavegas, TN Telradmaniac OP Member
OP Telradmaniac Member Joined: Feb 2005 Posts: 439 Chattavegas, TN	Apparently, none of the problems were related. The only one I could recreate was the problem-child extension. I got my Testar out and tested it at block, and found that it is a da*ned wiring problem, making this another pointless post. Sorry guys. I really appreciate the responses.

Moderated by SSPhone

Hop To

Link Copied to Clipboard

Forum Statistics

Forums84

Topics94,285

Posts638,782

Members49,766

Most Online5,661
May 23rd, 2018