|
|
Joined: Aug 2003
Posts: 226
Member
|
OP
Member
Joined: Aug 2003
Posts: 226 |
I have a customer with a dk280 with a b r2 processor. There is a PEPU card in the last usable slot on the expansion cabinet. I want to add a piou for remote mtce. Will the 2 cards conflict with each other. The pepu card is set as the amp for the speakers. Thanks JBW
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
I take it you want to swap out the PEPU with the PIOU? Sure, no problems there. If you want to have both, I believe the card assigned in the lowest slot controls the paging. But I wouldn't think you needed both cards since the PIOU will do both paging and remote maintenance.
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
Member
Joined: Feb 2005
Posts: 1,037 |
You need to make sure what is hooked up to the PEPU, if only one pair for paging then you can sway the cards out. You can't have two I/O cards in the same cabinet ..except the multi port I/O that goes in the first slot.(Rssi)?
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
2 members (pvj, newtecky),
118
guests, and
304
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|