web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#190394 08/01/07 06:59 AM
Joined: Nov 2004
Posts: 13
miked Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 13
I am very new to this system, I am more familiar with Avaya. Anyway I have a CTX100 and a IVP8 voicemail, I am trying to delay the voicemail from answering for 4 or 5 rings before going to their AA. What step should I look at to do this. I have the CTX admin software but not the Stratagy software.
Mike D.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#190395 08/01/07 07:50 AM
Joined: Feb 2007
Posts: 1,314
Member
Offline
Member
Joined: Feb 2007
Posts: 1,314
What type of trunks are you using? I like to point my main number to a multiple call group with the receptionist and all other needed ext's set as immediate and the vm pilot number on a delay. This is just one way of doing it.

#190396 08/01/07 11:04 AM
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
*****
Offline
Former Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
RRhino is right. Place all of your phones that you want to ring in a MCG (I call mine 650). Then add the VM group number on a delay ring. Make sure you don't have a VMID on the GROUP tab or it will be answered by that mailbox.

Then point the ring assignments for DAY RING to 650


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom
#190397 08/02/07 12:15 AM
Joined: Nov 2004
Posts: 13
miked Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 13
I am using loop start co lines. What program codes should I look at in order to do what you are saying, I tried to look at group programming but did not see any thing about delay ringing.

#190398 08/02/07 03:51 AM
Joined: Feb 2007
Posts: 1,314
Member
Offline
Member
Joined: Feb 2007
Posts: 1,314
In the CTX admin software, go to Advanced Configuration>Station>Multiple Call Group. Create a multiple call group(say 650) and in the member tab, enter all the stations you want to ring on incoming calls and set them for immediate. Then put the voicemail pilot number in there and set for delay1 or 2. The timers are set in the previous screen. Then go to Advanced Configuration>Trunk>Assignments and in the DIT tab, put Dialing Digits as the destination type, and the multiple call group number in for the destination digits. So thats program 517 and 518 for the MCG, and 310 for the trunks.

#190399 08/03/07 12:59 AM
Joined: Nov 2004
Posts: 13
miked Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 13
Thanks Rhino your the man
Mike D.

#190400 08/03/07 02:11 AM
Joined: Nov 2004
Posts: 13
miked Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 13
RRino ijust got on site and found the there is no MCG tab no 517 or 518 program what do I do now.
Mike D.

#190401 08/03/07 02:35 AM
Joined: Nov 2004
Posts: 13
miked Offline OP
Member
OP Offline
Member
Joined: Nov 2004
Posts: 13
Anyone out there got any ideas on this I am onsite and dying.
Mike D.

#190402 08/03/07 03:24 AM
Joined: Dec 2006
Posts: 810
Member
Offline
Member
Joined: Dec 2006
Posts: 810
If you don't see the MCG's then your S/W is too old to have it. You could put a phantom DN on one of your phones and make that phone the owner. CF/NA the phantom with a 20 sec. timer to VM and then DIT the trunks to the phantom. You will need go into key programming and make sure the phones are set to ring those trunks.

BTW, what s/w rev. is on the CTX?


Pat Austin
Teleco Inc.
Product Manager/Sales Engineer
Adtran ATSP
TCTE/CTP Certified

Teleco Homepage
#190403 08/03/07 04:15 AM
Joined: Feb 2007
Posts: 1,314
Member
Offline
Member
Joined: Feb 2007
Posts: 1,314
What version of software are you running on the CTX and what admin program are you using?

Page 1 of 2 1 2

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,096 Shoretel
187,702 CTX100 install
186,791 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
0 members (), 97 guests, and 235 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5