|
|
Joined: Jul 2006
Posts: 5
Member
|
OP
Member
Joined: Jul 2006
Posts: 5 |
Its hot here in Tropical Buffalo NY and the overheated telcom room took out another compact flash on our Stratagy Brick!
My problem is when I attempt to connect with the admin software via my null modem cable I get this error "unable to right status while initialize the modem"
I am using the same laptop, admin software and cable that I used last year to reload the compact flash software. Is there a step I am missing? Thank you, Ken
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
what com port do you have set in the admin program ?? If you are using com 1 , I have never been able to connect localy using com1 have to use com 2, not sure if everyone has this problem or just me , could be because my modem is com 1
|
|
|
|
Joined: Jun 2005
Posts: 2,706 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,706 Likes: 7 |
I always used com 1 for serial cable, and com 2 for modem.
I've seen that error when I had problems with the cable. I switched out the null modem cable and connected without a problem.
|
|
|
Forums84
Topics94,285
Posts638,782
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
81
guests, and
179
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|