| | Joined: Sep 2007 Posts: 67 Member | OP  Member Joined: Sep 2007 Posts: 67 | I get no display on Telephones and I get Intercom dial tone only. Can I get some help? | | | | | Joined: Jan 2006 Posts: 2,266 Member | | Member Joined: Jan 2006 Posts: 2,266 | Program 35 LED's 1&2 shouls be lit, are you saying that when you go off hook you get intercom dial tone? If so program 32 is where you can change that | | | | | Joined: Sep 2007 Posts: 67 Member | | OP Member Joined: Sep 2007 Posts: 67 | When I power the system up should I get something on the display? How can I program without a display? I get no lights on co key either. | | | | | Joined: Jun 2003 Posts: 3,271 Moderator-Toshiba | | Moderator-Toshiba Joined: Jun 2003 Posts: 3,271 | Try this. Power off the DK. Move the battery strap in the cabinet to off for 30 seconds and then move it back to on. Power up the cabinet and see if it comes back to life. | | | | | Joined: Sep 2007 Posts: 67 Member | | OP Member Joined: Sep 2007 Posts: 67 | Were is the battery strap located in the cabinet? | | | | | Joined: Jun 2003 Posts: 3,271 Moderator-Toshiba | | Moderator-Toshiba Joined: Jun 2003 Posts: 3,271 | Next to the battery. Check the I&M manual. | | | | | Joined: Jan 2006 Posts: 2,266 Member | | Member Joined: Jan 2006 Posts: 2,266 | Or use program 90 to initailize programs 00-97 | | | | | Joined: Sep 2007 Posts: 67 Member | | OP Member Joined: Sep 2007 Posts: 67 | Thanks for all the help, everything seems to be fine when I enter the programming mode,the LCD Display came up when I started program 90 to initalize programs 00-97. | | | | Forums95 Topics94,290 Posts639,121 Members49,425 | | Most Online5,661
May 23rd, 2018 | | |
15 members (Retro-Phones, sketchypro, pvj, bditech, Yoda, MooreTel, BobRobert, nameless, Touch Tone Tommy, Silversam, justbill, hbiss, sundance, nortelvoip, Mercenary Roadie),
134
guests, and
39
robots. | | Key: Admin,
Global Mod,
Mod | | |
|
