|
|
Joined: May 2004
Posts: 34
Member
|
OP
Member
Joined: May 2004
Posts: 34 |
Working with DK424 Ver B2CAU/B4. Trying to program analog cordless to ring at same time as front desk phone on incomming DID calls.
Unable to find multiple call groups in programming manual. Unable to configure Phantom ext on analog cordless. Mostly just confused. Thanks for any help.
The Phone Ranger
Salt Lake City, UT.
|
|
|
|
|
Joined: Jan 2010
Posts: 10
Member
|
|
Member
Joined: Jan 2010
Posts: 10 |
You have to use PhDN. DK424 does not use multiple call group.
Gr8phones4less
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
No multiple call groups or ring groups exist on the DK. You cannot make an slt ring in conjunction with a dkt/ekt set, but you can make a dkt ring in conjunction with an slt. That's because in prog 39, you can place an SDN on a dkt/ekt but you can't program an SDN on an slt. In your situation, I would advise against it because you wouldn't want to target a single-line phone if you expect to recieve multiple calls. But if you wanted to... Prog 71 target the port of the cordless. Prog 39, place a SDN appearance of the cordless on the front desk phone. Prog *71 assign ringing of cordless to desk phone port.
|
|
|
|
|
Joined: May 2004
Posts: 34
Member
|
|
OP
Member
Joined: May 2004
Posts: 34 |
Greatful for the quick reply with great detail. I will work on it. thanks
The Phone Ranger
Salt Lake City, UT.
|
|
|
|
Forums84
Topics93,877
Posts636,993
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
148
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
