web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2010
Posts: 47
Member
OP Offline
Member
Joined: Nov 2010
Posts: 47
Having a problem and wonder if anyone else has had this. I have a customer with a 3 cabinet dk424 w/ a c/d proc. I upgraded the s/w to 4.3 and installed a pri circut. Everything work's ok but....the last 32 ports of the system cant call out. They can receive calls. They are all in the 3rd cabinet, replaced cabinet and power supply, also main cabinet and power supply. Initialized system and just programmed pri and phones call out ok. As soon as I uploaded the programming with dk admin, problem happened again, I found if I put a phone number in prg *68-2, the phone's will call out ok, with *68-2 blank no outboud call's. all the other ports work ok. I need some of these phone's to send a seperate number using *69. I dont want to reprogram the system by hand (3 acd group's, many phantoms, etc. etc.) any suggestion's would be greatly appreaciated.
Thank's, Dave.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
What do you have for *69-1 for the affected stations? Are they set the same as the unaffected stations?

Joined: Nov 2010
Posts: 47
Member
OP Offline
Member
Joined: Nov 2010
Posts: 47
Yes, it's the same for every station in the system. Right now I'm just sending out one number, but eventually, they want to send out three different numbers. I can change *69-1 to a different index and unaffected stations will follow programming. But until I get this figured out, I'm making every station the same.
Thank's, Dave.

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
Are you trying to append to the index number using *09. If so, check *09 for the affected ports and see if they have valid DN numbers that, when appended, send out a total of 10 digits and that the phone number sent out is accepted by telco.

Joined: Nov 2010
Posts: 47
Member
OP Offline
Member
Joined: Nov 2010
Posts: 47
No, if I understand correctly, the info I input for *69-2 is (2-xxxxxxxxxx). 2 for fixed number then a 10 digit phone number that is associated with the pri circut.

Joined: Nov 2010
Posts: 47
Member
OP Offline
Member
Joined: Nov 2010
Posts: 47
Phonemeister, I went on site this morning and checked *09, the affected port's had no info in *09. gave them digits and problem was solved. I have no idea why the original installer took away the digits for 32 ports. Thank you for helping me with this problem.
Dave.


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,097 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
1 members (Curlycord), 85 guests, and 234 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5