web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
#206766 05/08/12 10:35 AM
Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
I've got a stratagy IVP8 in a CTX100 that was installed a few years ago. I haven't been in the system for quite a while, but need to get in now and add a mailbox.

The old PC with serial port I used to use died some time back, so I am trying to access the unit with a USB to serial converter and the R4 admin program. I know I have the USB device on the correct COM port - but when I run the admin program and enter the password (default used) I get a response that the system is unable to connect to the modem?

The only thing I am doing different here is using a different PC with the USB-serial converter. The cable to the IVP8 is the same as I used before, and I am pretty sure I was using this install of the admin program (although I am not 100% sure what version I had on that old PC)

Wondering if anyone has any suggestions of what to check or perhaps a different approach...........before my nervous breakdown.

Thanks! :scratch:

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
We have found that so many times, USB serial converter doesnt work. So we engineered a network voicemail programmer, it works everytime. Leave it on site for easy remote changes.

Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
I found an older laptop with a regular com port, and also found that our company has the VM Manager software.

Will I have better luck with this setup?

Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
Woe is me! I switched to a PC with a regular com port - tried a different cable - tried both R4ADMIN and VM Manager, and I still can't get connected to the Stratagy IVP8. I get a response of handshaking error on VM Manager, and a response of NO ECHO and NO GOOD OK on the R4ADMIN.

I am beginning to think the IVP8 has a problem. I have not tried rebooting the PBX yet- I suppose I can try that but will need to make a visit outside of business hours to do so....

I would like to hear from those of you with more experience on the IVP8. I have only done a couple of these....... is there any history of the prot failing on the VM? Does anyone think a reboot of the PBX might help?

All functions are currently working on the VM, but I do need to add a couple of mailboxes, and would like to set the VM to snch to the PBX for time.

All input appreciated!

:shrug:

Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
Never had a problem connecting with Gold-x USB but just bought a ID-SC0211-S1 1PORT Industrial USB To RS232 Cable for $33 from Amazon because it has some sync that is missing from others, says my best/smartest/do anything guru.

https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Delectronics&field-keywords=ID-SC0211-S1+1PORT+Industrial+USB+To+RS232+Cable


THE Bracha, old blond specialist in Rube Goldberg solutions.
Joined: May 2011
Posts: 73
Member
Offline
Member
Joined: May 2011
Posts: 73
Did you check the baud rate?
I'm pretty sure the IVP8 baud is 57600.

Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
Yes - I have tried different baud rates, and taken the USB-serial device completely out of the equation. Starting to think I may have a bad unit here....

Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
*****
Offline
Former Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
IVP8 has a built-in soft modem. Have you tried to dial in with VM Manager?


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom
Joined: Aug 2005
Posts: 560
Toolie Offline OP
Member
OP Offline
Member
Joined: Aug 2005
Posts: 560
I have VM Manager, but just treid it directly connecting to port 2 on IVP8. Is there a way to "call" the unit? I know there is a remote access capability for IVP8, but really didn't look at it very much..........

Joined: Jan 2006
Posts: 2,266
Likes: 1
Member
*****
Offline
Member
*****
Joined: Jan 2006
Posts: 2,266
Likes: 1
Is this a R1 or R2 IVP8 , The R2 you connect to com 1 on the card. What color is the front plate of the IVP8 ?

Page 1 of 3 1 2 3

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,096 Shoretel
187,702 CTX100 install
186,790 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
0 members (), 115 guests, and 233 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5