|
|
Joined: Sep 2004
Posts: 1
Member
|
OP
Member
Joined: Sep 2004
Posts: 1 |
We have a 4 port Digital Dispatch that up until yesterday was operating fine.
Then after a power failure (the entire phone system is on an UPS) the Dispatch unit failed to startup and does not even give diagnostic LED readout when you try and power it on. The power brick is putting out correct power (19.1V AC) so that isn't the problem.
Anyone have any clues. Vodavi's techsupport hasn'tbeen pickingup their phones (and there is no voicemail for the Techsupport lines).
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
The only thing i can suggest is to reseat the BIOS chip and hope it comes up.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
If you need a replacement I have a 4 port digital TalkPath I would let go for cheap.
------------------
Bound to cover,
just a little more ground.
|
|
|
|
|
Joined: Aug 2003
Posts: 5,149
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,149 |
Is the unit is one of the older 386 models with the battery tray on the right hand side? If so, try removing the 8 AA batteries and reboot.
We've had that problem when the batteries get old.
Otherwise, you may have lost a hard drive.
|
|
|
|
Forums84
Topics93,877
Posts636,989
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
131
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
