|
|
Joined: Mar 2009
Posts: 3
Member
|
OP
Member
Joined: Mar 2009
Posts: 3 |
We have a just installed a new STS-E system to replace our older STS system that recently fried. Everything works fine except for the auto attendant/voice mail communication. A call will go to the extension, however the voice mail does not pick up at all. :bang: Any suggestions? THANKS for the help!
Kristi~
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
Have you set your preset call forward for the CO lines and stations to tell them to go to VM?
Retired phone dude
|
|
|
|
|
Joined: Sep 2005
Posts: 971
Member
|
|
Member
Joined: Sep 2005
Posts: 971 |
In mailbox options of main menu of the mailbox set direct transfer to mailbox.
-TJ-
|
|
|
|
|
Joined: Mar 2009
Posts: 3
Member
|
|
OP
Member
Joined: Mar 2009
Posts: 3 |
Justbill - I'm not sure, I thought I did that through flash programming; how exactly would I do that?
STS E - wouldn't that bypass going to the extension first?
Both of you - please forgive my seemingly silly questions. I'm not a programmer, just an administrator trying to get our phones to work again. :-}
Kristi~
|
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
It is done via progamming one is for what you want the CO lines to do on an incoming call and another for what you want the stations to do.
Direct transfer you send calls directly to the mail box. This is in the user guide. The preset call forward is in the programming manual.
Retired phone dude
|
|
|
|
|
Joined: Mar 2009
Posts: 3
Member
|
|
OP
Member
Joined: Mar 2009
Posts: 3 |
The preset to voicemail is complete however the calls still do not forward to voice mail...
Kristi~
|
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
Which calls? CO or stations there are two. I assume you are using the inskin flash VM card in the STSe. What group are you forwarding to?
Retired phone dude
|
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
|
|
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268 |
Kristi--Welcome to the board.
1. Where did you get the system that was just installed? If it was used---did you default the system---or does it still have "residual" programming in it.
2. We're taking it that you have a Programming Manual and are familiar with the programming procedures. Correct??
3. Have you checked the number of rings that the phones are set for preset to VM?
4. Have you tried a system reset after you did your programming. Sometimes that helps.
|
|
|
|
Forums84
Topics94,289
Posts638,795
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (James D., Toner),
202
guests, and
384
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
