atcomsystems.ca/forum Forums TDM Business Telephone Systems Vodavi Telephones & Systems Getting multiple lines to ring over an external speaker

Greetings, I have a request from a customer to make all of the incoming phone lines ring over a loud speaker in a garage. I have a Valcom 2001 paging control unit, an XTSc phone system. Valcom support say's to connect the relay port on the CKIB to the UNA/Warble input, I am looking at the flash 14 programming for Relay Programming where it says to use code 4 for CO and the CO number to ring. How do I get it to ring all 3 lines? This looks like it will only set up 1 line to ring.

What if you just set up UDA for all associated lines that will allow the warble tone to be generated over the KSU's paging output port? You could even use the UNA feature if you want to turn this on and off.

Just send the page output of the KSU into the input of the 2001 and it will work all the time, based upon the day/night setting of the phone system.

I will give that a try. Thanks.


Mark

If that doesn't work simply use a Viking PA-2A it has capability of connecting 6 co lines to your paging to be used as a ringer. Takes about 5 minutes to install if you have the paging system set up already.