web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#231192 07/17/06 06:55 AM
Joined: Jul 2004
Posts: 279
dell Offline OP
Member
OP Offline
Member
Joined: Jul 2004
Posts: 279
Lost power over the weekend got the system up and do have a T-1,can make outbound calls but all inbound were answer by a fax tone.Also could not get the vm to answer dialing 199.Went in programming 4-10 check the exts,but did not see the vm ext number also ext 100 was port 1,but the phone display is 108.So I checked my ext list all the ext now have a different ext number.I checked the ext cards not trouble need some help asap.


If you say you don't know you will get more respect.
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#231193 07/17/06 12:28 PM
Joined: Mar 2003
Posts: 679
Member
Offline
Member
Joined: Mar 2003
Posts: 679
Well if you didn't change out the memory battery, then this will happen again.

The system looks at all the cards when it powers up and assigns the extensions in ascending order from the first ESI card it sees.

More than likely your original install had some cards added later and the extension numbering was changed.

Best hope is that all your stations are display sets and you can go to each set and press the FNC/Feature key dial 4 and find out what port they are on and renumber.

By default only the first 2 stations are assigned to ring on the first 8 lines, but if you did a copy of either one of those stations to all the other ports and if you have a SLT card in there then it is trying to answer.


DJ

#231194 07/17/06 02:41 PM
Joined: Jul 2004
Posts: 279
dell Offline OP
Member
OP Offline
Member
Joined: Jul 2004
Posts: 279
I found that we had a ESI card in Cab 1 and it is bad so when the system came back up in 7-1 that card is there and I can't change it to non.Tried a 8-8 no use.The battery is solder on the cpu board,but for the last 4 hours I have powered down and up over 20 times and it keeps the same time.Can you tell me how to do a hard reset or first intialization.


If you say you don't know you will get more respect.
#231195 07/18/06 12:30 PM
Joined: Nov 2003
Posts: 1,313
Member
Offline
Member
Joined: Nov 2003
Posts: 1,313
switch the battery off then power down


Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
teleco 4
Who's Online Now
1 members (Toner), 122 guests, and 242 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5