|
|
|
|
Joined: Jul 2005
Posts: 119
Member
|
OP
Member
Joined: Jul 2005
Posts: 119 |
I looked through the hardware manual and cannot find the pinouts for the db9 to mod end adapter for the SMDR output. Does anyone have that?
The adapter I ordered from NEC came with the pins out.
Thanks!!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2005
Posts: 119
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 119 |
I found the pin outs for the SMDR DB9 to mod end for the DS2000. Anyone know if it is the same for the DSX?
|
|
|
|
|
Joined: Jan 2007
Posts: 345
Member
|
|
Member
Joined: Jan 2007
Posts: 345 |
This was copied from a Prvious Forum
All In One Communications
Mustang, OK
|
|
|
|
|
Joined: Jan 2007
Posts: 345
Member
|
|
Member
Joined: Jan 2007
Posts: 345 |
Here are the smdr connections for the dsx. SMDR Connections Hope this helps. Brian
All In One Communications
Mustang, OK
|
|
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
As ALLN1 Stated they are different Here is the pinout for the DSX ![[Linked Image from i2.photobucket.com]](https://i2.photobucket.com/albums/y24/donbaker/Phone%20Stuff/DSXSMDR.jpg) and don't forget to check the cable an make sure it is reversing Pin 1 to pin 6 etc..
|
|
|
|
|
Joined: Jul 2005
Posts: 119
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 119 |
Hi guys. I found the pin outs. I just wasnt' looking close enough and at 39 my eye sight first thing in the morning is not great! www.necsdx.com says to use a standard 6 pin line cord to connect to the SMDR. The link to the other forum says that I need to reverse this cord. Is this true? Thanks, John
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
did you look at the SMDR FAQ at the DSX site ? https://www.necdsx.com/faqs/connecting_smdr.htm they say standard cord , thats what I would use
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
Standard cords 2, 4, and 6 pin cords - reverse. Take a look at one that works, But I Have seen them Straight Thru too, they wont work. I just want to make sure that he gets it right the first time  .
|
|
|
|
Forums84
Topics94,289
Posts638,795
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Touch Tone Tommy),
152
guests, and
413
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from i2.photobucket.com]](http://i2.photobucket.com/albums/y24/donbaker/Phone%20Stuff/baker_telecommunications_inc_small-.jpg)
