Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
FMS - VM issue
#235053 09/06/07 08:12 PM
Joined: Jun 2004
Posts: 253
domino Offline OP
Member
OP Offline
Member
Joined: Jun 2004
Posts: 253
Why would the BCLR LED on a FMS card BLINK green...
VM working...cannot get in Admin (SS) but other than that it working fine...Any Ideas?

EMP & Lightning Home Surge Protection
EMP - Click Here!
Re: FMS - VM issue
#235054 09/07/07 05:38 AM
Joined: Apr 2007
Posts: 1,439
Member
****
Offline
Member
****
Joined: Apr 2007
Posts: 1,439
Are you trying to get into admin w/ cosessions or through a manager mailbox?

I ask because if dip switch 3 is flipped on the front of the card it puts the system in 'modem' mode and will not allow you access through the serial port. You would have to put dip switch 3 back and re-boot the vm.

As far as a blinking green BCLR, never seen that one.

D

Re: FMS - VM issue
#235055 09/07/07 12:55 PM
Joined: Jun 2004
Posts: 253
domino Offline OP
Member
OP Offline
Member
Joined: Jun 2004
Posts: 253
I did check that (switch setting) and they are all set correctly. Still couldn't get into admin.But the blinking LED is still the puzzler.

Re: FMS - VM issue
#235056 09/09/07 01:49 PM
Joined: Jul 2005
Posts: 1,325
Member
*****
Offline
Member
*****
Joined: Jul 2005
Posts: 1,325
I assume that you have rebooted the mail?? First thing i tell the techs here when they have an issue..


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Re: FMS - VM issue
#235057 09/09/07 05:40 PM
Joined: Jul 2006
Posts: 171
Member
Offline
Member
Joined: Jul 2006
Posts: 171
I have saw the BCLR light blink when the voicemail board finds an error, Normally if you log in with cosessions the error will be displayed on the banner screen, since you can not get in most likely cosessions running on the FMS board created the error. I would reboot the board and see if you can log in. If not shut the board down change the dip switches on the board to stop the host application and hopefully you will be able to connect. Anyway once you get in repair all dbase errors, defrag, if you continue to have issues after this I would restore the default system files. If you need to know the dip switch repost, I don't have a manual with me right now.


Moderated by  DrPbx, ttech 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
7100 Lan Printer Error
by RM SYSTEMS - 09/28/20 02:27 PM
Caller wait list
by Hofman telekom - 09/28/20 11:27 AM
TDA50G power consumption
by kenc - 09/27/20 01:23 PM
Who's Online Now
23 members (justbill, Skunky, vicbob, Yoda, jab1780, BobRobert, metelcom, Hofman telekom, MooreTel, phonman123, Carl Navarro, Touch Tone Tommy, Telesystems, newtecky, EV607797, nortelvoip, hitechcomm, hbiss, aweaver, RATHER BE FISHING, Keyset6, Bob3470, dexman), 266 guests, and 54 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,975
Posts637,356
Members49,356
Most Online5,661
May 23rd, 2018
Today's Birthdays
betsy, Cabling Lady, jcorsell, MVSpeed, sherif
Newest Members
xware, Adam19871, tmr-afmk, Big Alan, simsh
49355 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 34
hbiss 12
teleco 10
ABLE1 10
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners