web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Oct 2007
Posts: 19
MikeDCC Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 19
I have one station (DTH-16D) with the message indicator light blinking green in tandem with the Answer Button light. They're doing two fast blinks, about a second wait, then two fast blinks, repeat etc.

The Message light blinks green, the Answer Button light blinks red, and they blink together, simultaneously.

I have tried everything I can think of, including Feature-99-Feature, and I can't seem to figure out what is happening here.

Also on this station's display, phone numbers are showing up seemingly randomly in the lcd display, though the station isn't ringing. It almost looks like this station is getting caller id signals from incoming calls to our main line (which normally only show up at the operator's station).

Can anyone suss what is going on here?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jul 2006
Posts: 171
Member
Offline
Member
Joined: Jul 2006
Posts: 171
Check the DSS console (usually with the receptionist or operator) Press the bottom left button on the console then the extension that has the message light on.

Joined: Oct 2007
Posts: 19
MikeDCC Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 19
Yes that's what our vendor suggested when I called him, but that is different than what is happening.

I decided to set that lower left corner "Msg Button" from our operators DSS Console on MY phone (just to see what it did), and it made my phone's message light blink green, but steady off and on, not pulsing twice with a pause then pulsing twice again. Also, it didn't make the Answer Button (below the Redial Button) LED light up synchronously with it either. It only made my message light blink green steadily. So that isn't what is set on the station in question.

In any case, I set it and un-set it from the operator's DSS Console as you suggested, and it had no effect in making either or both lights stop blinking.

Thanks for the suggestion, but I'm afraid this is something else.

Joined: Jan 2007
Posts: 100
Member
Offline
Member
Joined: Jan 2007
Posts: 100
What is the software revision on your IPK? I recall early revisions 1000/1500 having some issues with this. Feature + 3 on a display phone should give you the revision number.

Joined: Mar 2003
Posts: 679
Member
Offline
Member
Joined: Mar 2003
Posts: 679
This usually indicates that someone has called your station and inadvertantly pressed the MSG softkey to leave a callback message.

Call the extension numbers being displayed. When you call those stations back make sure you do a handset to handset conversation not a handsfree answerback. When you do a handset to handset call this will cancel the MSG callback indications.

Joined: Oct 2007
Posts: 19
MikeDCC Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 19
Quote
Originally posted by Tip&Ring:
Call the extension numbers being displayed.
Ahh. But the numbers being displayed are actual 10-digit local phone numbers, not extension numbers. A few of these I recognise as being field employees cell phone numbers. Others are probably customers. That's why I said they looked like caller id's. Guess I should've been clearer, sorry.

I'll look at it again tomorrow morning before things get busy to see if there are any 3 digit extension numbers flashing in the display, but I doubt it.

I'm no longer at work, but I'll get back with the software revision tomorrow morning.

Joined: Nov 2007
Posts: 369
Member
Offline
Member
Joined: Nov 2007
Posts: 369
Are you sure it is an IPK and not IPK II? With IPK, press FEATURE + 4 and your station number will appear on display along with port number.

With IPK II (Same software as Aspire) the display will be a three line display with date/time on top line, station number on center line....... (don't need to press anything to see this)

or

Press the HELP button plus HOLD and the software version will appear.

If it is IPK II .... at that station press SPEAKER + 773 to clear message lamp.


"I didn't do it, and I won't do it again"
Joined: Oct 2007
Posts: 19
MikeDCC Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 19
It is indeed the Electra Elite IPK, as I know that Feature+4 displays the station number and port number. Feature+3 displays the software revision, IIRC (though I don't remember the revison number offhand, I can look tomorrow).

I've also seen the KSU cabinet, as I'm the systems admin, and the KSU cabinet is in my server room.

Joined: Oct 2007
Posts: 19
MikeDCC Offline OP
Member
OP Offline
Member
Joined: Oct 2007
Posts: 19
Well this morning, the blinking lights were gone. I'm told (by our vendor tech) the system resets itself every night, and he thinks that probably cleared it, whatever it was.

For what it's worth, our system software is:
SP1034 R4.70
KeySys R1UP 192P

Joined: Jul 2006
Posts: 731
Member
Offline
Member
Joined: Jul 2006
Posts: 731
It sounds like there were calls coming into that station. Did we try to answer them? Check ringer volume control (speaker 601) & check the ringer volume. We also want to check if we have line access on this station. If there is'nt any, then you won't be able to answer the call.


www.phonelinetech.com


"Can I Still Call Out?"
Page 1 of 2 1 2

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,110 Shoretel
187,715 CTX100 install
186,809 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
teleco 4
Who's Online Now
1 members (Curlycord), 117 guests, and 412 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5