Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Nov 2008
Posts: 14
Member
OP Offline
Member
Joined: Nov 2008
Posts: 14
Hi there,

Has anyone managed to hook up a third party SIP phone to an SV8100? I can't get it working, the SIP phone always comes back with "registration failed" or other messages depending on the phone (I've tried one real phone and two soft phones).

I have DT700's working just fine on the same system.

Thanks,

Duncan.

Global Test Supply 728x90
Joined: Jul 2005
Posts: 1,332
Member
*****
Offline
Member
*****
Joined: Jul 2005
Posts: 1,332
I have gotten Xlite softfone and a Netcomm V90 hardfone working OK. Have you got standard SIP license installed?? MLT SIP license is different..


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Joined: Nov 2008
Posts: 14
Member
OP Offline
Member
Joined: Nov 2008
Posts: 14
Hi Paul,

Thanks for your reply.

I was beginning to suspect it was a licensing issue..

Whats the actual licence called that I need? Looking thru the list in Feature Activation within PC-Pro I dont see any that have "SIP" in the title.. but I also suspect its not a complete list?

Cheers, Dunc

Joined: Jul 2005
Posts: 1,332
Member
*****
Offline
Member
*****
Joined: Jul 2005
Posts: 1,332
I suspect it's the one below. but it's not in our price list down here.

LK-SYS-IP-TERMINAL-SIP1-LIC
SIP Client - One license One SIP Client - supports 3rd party SIP telephones, NEC MLT
SIP Terminals and/or NEC Softphone (SP310).


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Joined: Jul 2006
Posts: 731
Member
Offline
Member
Joined: Jul 2006
Posts: 731
Yes, there are 2 kinds of licensing, 1 for 3rd party sip, mlt sip & NEC softphone, & another for only NEC sip phones. The above posted license is correct.


www.phonelinetech.com


"Can I Still Call Out?"
Joined: Nov 2008
Posts: 14
Member
OP Offline
Member
Joined: Nov 2008
Posts: 14
Thanks Paul and IPKII.. much appreciated. I'll sort out the license and try again.

Best regards,

Duncan.

Joined: Nov 2008
Posts: 14
Member
OP Offline
Member
Joined: Nov 2008
Posts: 14
Hi Guys,

A bit more on this.

Our system now has 16 "IP Terminal Advanced" which I'm told support 3rd Party SIP Devices.

But I still cant connect.

I'm using extension 191 as a test. In 11-02 I've assigned it to an unused port (505) which is along side some working NEC IP Phones.

in 15-05 I've selected extension 191 from the Drop Down box and set up a NickName and an authentication password.

I have an ethernet cable plugged into the VOIP port on the IPLA card. The IPLA card is happily reporting an IP Address.

I've configured my 3rd Party SIP phone with the IP Address of the IPLA card and port 5070, I've used the extension number as the User and set the password to the password I set in 15-05.

I get "registration failed".

I've also tried 2 SIP soft phones (Ekiga on Linux and X-Lite on windows).. all fail.

I've tried port 5060 as well.. same result.

I've tried setting a blank password.. no good.

I've tried setting the MAC address in 15-05 to blank.. no good.

I've got a support call in with NEC locally.. but I wanted to put another iron in the fire here.

Any thoughts anyone?

With thanks,

Duncan.
Adelaide, South Australia.

Joined: Jan 2009
Posts: 2
Member
Offline
Member
Joined: Jan 2009
Posts: 2
Hello,

I was just looking at your post and had some info that may be of some use.

1. You should only require a password if you have enabled authentication in 10-33-02. Rule out authentication for now until you get an extension registered so remove the password you entered in 15-05.

2. Don't try port 5060 as this is for SIP trunks, 5070 is default for SIP extensions on SV8100.

3. X-lite does work with the SV8100 as I have done it. Try setting yours as follows:

Display Name: 191
Username : 191
Password : LEAVE BLANK
Authorisation Username : 191
Domain : 172.16.0.10:5070

Domain should be your IP address of the IPLA card in 10-12-09.

Enable the option Register with domain and receive incoming calls and then select the Domain option for sending outbound calls.

Try these changes and see how you get on.

If your struggling try a different extension number that has not been used before.

Thanks

Joined: Nov 2008
Posts: 14
Member
OP Offline
Member
Joined: Nov 2008
Posts: 14
Hi Waddid,

Thanks for a comprehensive reply.. After following your instructions I'm still getting "Registration error 400 - Bad request" from X-Lite..

Got any futher thoughts?

With many thanks,

Duncan.

Joined: Nov 2008
Posts: 14
Member
OP Offline
Member
Joined: Nov 2008
Posts: 14
Well.. a bit more info..

I fired up Wireshark and captured the register request from my PC to the SV8100:

https://www.duncanmargetts.com/blog/wp-content/uploads/2009/01/registerrequest.pcap

I also have a debug log from X-Lite showing the failed register request:

https://www.duncanmargetts.com/blog/wp-content/uploads/2009/01/x-litelog.txt

It would seem that SIP is definitely running, that I have the right IP address and Port.. but its just not happy with my Register Request frown

I have another SV8100 box here.. I'll set that up and try it.

With thanks for any input,

Dunc.

Page 1 of 2 1 2

Moderated by  ttech 

Link Copied to Clipboard
Advertising Sponsor
Most Recent 5 Post
How to subscribe to get full access.
by Ruben - 05/05/21 09:29 PM
OS UNI Card Version Question
by RM SYSTEMS - 05/04/21 04:53 PM
summit 100 no lines working
by davetel - 05/01/21 05:11 PM
MICS caller ID
by bditech - 04/30/21 05:57 PM
How do I edit my posts?
by Schreiber - 04/29/21 11:07 PM
Popular Topics (Views)
Forum Statistics
Forums93
Topics94,373
Posts639,627
Members49,454
Most Online5,661
May 23rd, 2018
Today's Birthdays
LEGRANDS COMMUNICATIONS, odin5
Newest Members
Andrea Sau, eos90066, Sonic, ERA, Mackino
49,454 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
defencebyte.com
Antiransomware
Global Test Supply
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 42
pvj 16
Ruben 14
bditech 11
Phone.com 300x250
300x250 Your Business Phone Service in the Cloud
www.aweber.com
landing page builder
Linked Banner to your Product or Website
NordVPN
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
26 members (Ruben, Curlycord, Touch Tone Tommy, newtecky, justbill, dexman, CyberLaw, Biztel Cuban Okie Tech, KRRath, gelehu, pvj, Silversam, hitechcomm, Daniel, JBean3329, MooreTel, metelcom, BobRobert, Skunky, dougster, Bob3470, ffej010, ssdr9163, Professor Shadow, Yoda, Mercenary Roadie), 347 guests, and 75 robots.
Key: Admin, Global Mod, Mod
vpnproxymaster
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud