web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Dec 2006
Posts: 12
Member
OP Offline
Member
Joined: Dec 2006
Posts: 12
I have purchased a used IPK (not IPKII) phone system that was previously used with only 2 incoming POTS lines and a fax, but I have 3 POTS lines and a fax.

Whoever set it up previously programed the call arrival keys on the DTH-8D IPK Dterm 80 like this:
buttons 1 and 2 show incoming calls. And can be used to access outside lines to make clls. button 3 is used to page "all". and button 4-8 are extension buttons.
We have no need for a paging function. And
I need to change that button (3) to show calls incoming on line 3. Currently, when line 3 rings the phones light up indicating that a call is coming in on the 3rd line. But we can not pick it up. Also, we cannot choose that line to make outgoing calls. (Because that button is set to "Page")

If this change is a system programming change and requires a tech visit, I would like to know if there is a key sequence that would allow me to pick up that line or use it to make outgoing calls until I get a tech in here?

Thanks
Mike

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Nov 2007
Posts: 369
Member
Offline
Member
Joined: Nov 2007
Posts: 369
Memory Block 4-12 is used to assign keys. Your display when in programming mode will look something like: 01:12:LK01=CO1 (where 01 is the station port, 12 is the memory block program, LK01 represents Line Key 1, and it is assigned as CO Trunk 1). For each station port (01 - xx) change LK01 to read LK03 (button 3 being assigned), press button 2 on the phone to select CO Trunk assignment, then press digit 3.... then [Transfer] to write to memory.


"I didn't do it, and I won't do it again"
Joined: Nov 2008
Posts: 953
Member
Offline
Member
Joined: Nov 2008
Posts: 953
If You have Never Programmed a System Before Mike, You Should Hire a Tech to Do this for You.


"The Only Stupid Question, Is the Question Thats not Asked."
Joined: Dec 2006
Posts: 12
Member
OP Offline
Member
Joined: Dec 2006
Posts: 12
Rickman,
I have not programmed an NEC before. But I have done many other types of systems.
With the information that eriway put in their post AND using the programming manual, I was able to get all the extensions programmed properly.

I appreciate all the information and help that was offered.

Thank you.

Joined: Nov 2008
Posts: 953
Member
Offline
Member
Joined: Nov 2008
Posts: 953
Good Job Mike :thumb:


"The Only Stupid Question, Is the Question Thats not Asked."

Moderated by  ttech 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5