|
Joined: Sep 2004
Posts: 1,436
Member
|
OP
Member
Joined: Sep 2004
Posts: 1,436 |
OK, what am I doing wrong here...
Trying to set up cell phone notification, selected 'voice home' type, put in cell number, didn't work. Added 9 in front of number, still didn't work. Remembered they're on centrex, added second 9 in front of number, still doesn't work. What am I missing?
Joe --- No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
On the Stratagy Admin do you see a port go offhook to notify? Try monitoring the trunk with a buttset during a notification. Could be that the Stratagy is dialing too fast as I've had that happen before on 'dial 9' centrex lines with direct trunk access without LCR. If that's the case, you can increase time between dialing digits in the Stratagy. However, if you hear the Stratagy go offhook and then immediately back onhook without dialing any digits, then you'll need to apply the notification patch.
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
OP
Member
Joined: Sep 2004
Posts: 1,436 |
Had to delete the mailbox (new vm, nothing lost) and recreate, with one 9 before the cell #. Also increased the answer delay time from 10 to 30 seconds.
[This message has been edited by junkman (edited May 04, 2005).]
Joe --- No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,675
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Coral Tech),
44
guests, and
19
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|