|
|
|
|
Joined: Jan 2007
Posts: 1,951 Likes: 2
Member
|
Member
Joined: Jan 2007
Posts: 1,951 Likes: 2 |
Call 888-4ADTRAN. The last time I checked, technical support was free.
"Press play and record at the same time" -- Tim Alberstein
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 100
Member
|
|
OP
Member
Joined: May 2005
Posts: 100 |
No luck with the F key and I am not sure how to check the firmware. I would also like to know why the ringer power supply makes that high-frequency noise and starts overheating. I will try and see what their tech support says, but am not hopeful.
You can always tell when something is old if it says "Made in USA"
|
|
|
|
|
Joined: Mar 2008
Posts: 24
Member
|
|
Member
Joined: Mar 2008
Posts: 24 |
Don't they make T1/PRI cards for this system?
|
|
|
|
|
Joined: Apr 2006
Posts: 254
Member
|
|
Member
Joined: Apr 2006
Posts: 254 |
If you still have no luck, I've got a couple of Adtran TA 612's that work and have no password setup
|
|
|
|
|
Joined: Jul 2005
Posts: 860
Member
|
|
Member
Joined: Jul 2005
Posts: 860 |
Originally posted by ringoffire:
Don't they make T1/PRI cards for this system? Nope.... That really wouldn't fit the purpose of an IAD type device. The T/A 850 takes for inputs, Frac-T1, TDM T1 (time division multiplexed,) ATM T1 (asynchronous transfer mode) and SDSL (synchronous digital service loop.) It’s outputs can support most all common DS0 channels as well as 10BaseT Ethernet.
-----------------------
Bryan
LEC Provisioning Engineer
Cars -n- Guitars Racin' (retired racer Oct.'07)
|
|
|
|
|
Joined: Jan 2008
Posts: 32
Member
|
|
Member
Joined: Jan 2008
Posts: 32 |
if you want to go old school go with the carrier access access bank 1 or 2 they work great and there simple to use. the carrier access adit also seems to work very well with asterisk. just my 2 cents
|
|
|
|
|
Joined: Jan 2008
Posts: 32
Member
|
|
Member
Joined: Jan 2008
Posts: 32 |
if you want to go old school go with the carrier access access bank 1 or 2 they work great and there simple to use. the carrier access adit also seems to work very well with asterisk. just my 2 cents
|
|
|
|
|
Joined: May 2005
Posts: 100
Member
|
|
OP
Member
Joined: May 2005
Posts: 100 |
Well after much fussing I found a power supply from an Adtran 750, stuck it in the 850 and it's working. I set it up with Asterisk and it worked....for a while. Since I was getting poor audio quality from the phone to Asterisk I started playing with settings, and it stopped working. I did pull out the Adtran and plugged in an Adit 600 I have and the lines work, so it's not Asterisk. The problem is that only 10 of the 24 FXS ports are active on the Adit, and some nut disabled the DIP switches and put a password in this thing, like all other Adits out there. It's amazing that nobody has figured a way to disable passwords in the TDM controllers, they are basically useless without access and evidently the designers were not able to include a reset. Pure Genius.
You can always tell when something is old if it says "Made in USA"
|
|
|
|
Forums84
Topics94,289
Posts638,797
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
