|
|
|
|
Joined: Dec 2007
Posts: 115
Member
|
OP
Member
Joined: Dec 2007
Posts: 115 |
We have PTP non PRI T1's. I want to replace the T1 citcuit, but not the T1 card. Need a blackbox that takes SIP in sends T1 out.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2011
Posts: 143
Member
|
|
Member
Joined: Feb 2011
Posts: 143 |
Could you elaborate on "replace the circuit but not the card" part a bit?
"...Time moves slowly and it goes so fast..."
(Sandy Denny)
|
|
|
|
|
Joined: Dec 2005
Posts: 818
Member
|
|
Member
Joined: Dec 2005
Posts: 818 |
Adtran makes a good box that takes SIP trunks and makes the PBX use them as a T-1/PRI, so does Epygi and others.
Steve
|
|
|
|
|
Joined: Mar 2008
Posts: 54
Member
|
|
Member
Joined: Mar 2008
Posts: 54 |
Audiocodes Mediant 2000
Quintum Tenor DX
NET VX1200
Dialogic DMG2000
Patton Smartnode.
Also Cisco 2800/2900 series ISRs with VWIC T1 card and PVDM DSP module installed.
|
|
|
|
|
Joined: Jun 2009
Posts: 13
Member
|
|
Member
Joined: Jun 2009
Posts: 13 |
Some carriers can provide SIP over T1 via a gateway box at your premise. It functions as a carrier managed solution which would not require the purchase of additional equipment. Not sure if this is what you're looking for however.
|
|
|
|
Forums84
Topics94,280
Posts638,742
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
