|
Joined: Aug 2001
Posts: 2
Member
|
OP
Member
Joined: Aug 2001
Posts: 2 |
Does anyone know where I can obtain the pin wiring for the DB9 adapter used in programming a Comdial Impression system with a laptop or terminal. I believe Comdial's part number is DXCBL. It is the one that connects to the serial input of the laptop while the other end connects to a standard 4 conductor modular cable that plugs into the CPU port ?? Thanks
[This message has been edited by soldout (edited 08-28-2001).]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You can get one at Radio Shack. Hope this helps dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Aug 2001
Posts: 2
Member
|
OP
Member
Joined: Aug 2001
Posts: 2 |
Thanks dtmf but no go. They have the one I have that has to be wired. Unfortunately I don't know what pins the wires go on.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
If you put your e-mail in your profile I could send you the specs. dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Sep 2001
Posts: 2
Member
|
Member
Joined: Sep 2001
Posts: 2 |
DTMF. I forgot the password I used so I re-registered under soldout2. My email is now in the system. Thanks for the future pin wiring !!!
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
I really hate to tell you this but your e-mail still isn't there. Didn't I send you the pin readouts already? I know I sent them to some one. dtmf
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Sep 2001
Posts: 2
Member
|
Member
Joined: Sep 2001
Posts: 2 |
Ok, try this. [email protected]I was only selecting the "moderator" can see. Maybe that was the problem. Either way, there it is PS No, it wasn't me you sent it to
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Russ runs a local service and private tech center. [/url]
|
|
|
|
Joined: Jul 2001
Posts: 23
Member
|
Member
Joined: Jul 2001
Posts: 23 |
GN=2 RD=3 BK=5 if that doesn't work just reverse GN & RD if that doesn't work substitute YL for BK if that doesn't work reverse GN and RD. One of these combinations HAS to work if your baud rate is correct. It should only take a minute or two to finger it out.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
140
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|